저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black standalone SATA duplicator with three vertical drive slots and four-button control panel

Acumen Disc

Acumen Disc H03-SATA2 Hard Drive Duplicator 1 to 3 300MB/s

SKU CH-S6B7-P944G

Standalone duplicator copies up to three SATA hard drives or SSDs at 300 MB/s and offers seven DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • ConnectorSATA
  • Target1 to 3
  • Buffer Memory128M

Target 1 to 3

Data Transfer Rate 300MB/s

  • Copies three drives simultaneously at 300 MB/s per slot
  • Two duplication modes: quick file copy or full sector-by-sector clone
  • Seven sanitisation methods including DoD 3-pass and 7-pass standards
  • Operates standalone with no host PC or software required
  • Accepts 3.5" and 2.5" SATA drives without adapters

Duplicates up to three SATA drives

The Acumen Disc H03-SATA2 is a standalone duplicator that copies one source SATA drive to three target drives at once. It accepts both 3.5" and 2.5" SATA hard disks and solid-state drives without adapters. Operation requires no host computer or software, so the unit works entirely offline for secure duplication or sanitisation tasks.

Check drive interfaces and power

Verify that every drive you plan to use has a native SATA connector, because the duplicator only provides SATA slots. The unit draws AC power from a 115-230 V, 50/60 Hz supply, so confirm a compatible mains outlet is available. No host system or driver installation is needed, but ensure the source drive is not write-protected if you intend to copy its full contents.

Slot-load chassis with Athena controller

The black slot-load chassis holds drives vertically for quick insertion and removal during high-volume jobs. An Athena controller with 128M buffer manages transfers at up to 300MB/s across all three target ports simultaneously. Seven erase modes including DoD 3-pass and 7-pass to the 5220.22-M standard let you sanitise media to recognised security levels without attaching the drives to a PC.

주요 특징

  • Copies three drives simultaneously at 300 MB/s per slot
  • Two duplication modes: quick file copy or full sector-by-sector clone
  • Seven sanitisation methods including DoD 3-pass and 7-pass standards
  • Operates standalone with no host PC or software required
  • Accepts 3.5" and 2.5" SATA drives without adapters

사양

BrandAcumen Disc
TypeHard Drive Duplicator
Part NumberH03-SATA2
Panel ColorBlack
Operating TypeStandalone
ConnectorSATA
Target1 to 3
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What comes in the box and do I need to buy anything else to duplicate 3.5" and 2.5" SATA drives?

The duplicator includes an adapter for 3.5" SATA drives; 2.5" SATA drives fit the slot directly. No extra hardware or software is required for standalone operation.

Which copy mode should I choose between System and Files (Quick Copy) and Whole HDD (Full Copy)?

System and Files copies only used space for speed; Whole HDD copies every sector including empty areas. Select based on whether you need a bit-for-bit clone or a faster transfer.

What does the 300MB/s transfer rate mean when the duplicator is running three target drives at once?

Each of the three slots can sustain up to 300MB/s simultaneously, so total throughput scales with the number of drives inserted.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.