저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Acumen Disc

Acumen Disc H07-SATA2 1-to-7 SATA Duplicator 300MB/s

SKU CH-VA25-NCFXR

Standalone duplicator copies up to seven SATA drives at 300 MB/s with seven DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Target1 to 7
  • Buffer Memory128M
  • ControllerAthena Controller
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate300MB/s

Data Transfer Rate 300MB/s

  • Copies up to 7 drives simultaneously at 300 MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA drives without adapters
  • Standalone operation — no host computer or software required

Standalone SATA Duplicator with Seven Targets

This Acumen Disc duplicator copies up to seven SATA hard drives or solid-state drives simultaneously at 300 MB/s. It operates without a host computer, using an Athena controller and 128 MB buffer to manage duplication and secure erase tasks directly from the front panel.

Suits IT teams sanitising

The unit handles both drive form factors without adapters and offers two copy modes plus seven erase modes including DoD 3-pass and 7-pass standards. It is not for users who need more than seven target slots or who require interfaces other than SATA.

300 MB/s per-slot transfer rate

Each of the seven target bays sustains up to 300 MB/s during duplication, delivering 18 GB per minute. The 128 MB buffer and standalone architecture keep throughput consistent across all slots without host bottlenecks.

주요 특징

  • Copies up to 7 drives simultaneously at 300 MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA drives without adapters
  • Standalone operation — no host computer or software required

사양

BrandAcumen Disc
TypeHard Drive Duplicator
Part NumberH07-SATA2
Target1 to 7
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the duplicator handle my existing 3.5" and 2.5" SATA drives without extra adapters?

Yes, the unit accepts both 3.5" and 2.5" SATA hard drives and SSDs directly in the seven slots; no adapters are required.

How can I confirm the duplicator copied every sector correctly after a job finishes?

The Athena Controller verifies each sector during Whole HDD mode; a pass indication on the four-button display confirms the target matches the source bit-for-bit.

What ships with the H07-SATA2 and what must I provide?

The duplicator includes the standalone chassis, power cord for 115-230 V supply, and the four-button controller; you supply up to seven SATA HDDs or SSDs.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.