Acumen Disc H03-SATA150 1-to-3 SATA Duplicator 150MB/s
- Hard Drive Duplicat…
- 1 to 3
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
Acumen Disc
Standalone duplicator copies up to three SATA hard drives or SSDs at 300 MB/s and offers seven DoD-compliant erase modes
The Acumen Disc H03-SATA2 is a standalone duplicator that copies one source SATA drive to three target drives at once. It accepts both 3.5" and 2.5" SATA hard disks and solid-state drives without adapters. Operation requires no host computer or software, so the unit works entirely offline for secure duplication or sanitisation tasks.
Verify that every drive you plan to use has a native SATA connector, because the duplicator only provides SATA slots. The unit draws AC power from a 115-230 V, 50/60 Hz supply, so confirm a compatible mains outlet is available. No host system or driver installation is needed, but ensure the source drive is not write-protected if you intend to copy its full contents.
The black slot-load chassis holds drives vertically for quick insertion and removal during high-volume jobs. An Athena controller with 128M buffer manages transfers at up to 300MB/s across all three target ports simultaneously. Seven erase modes including DoD 3-pass and 7-pass to the 5220.22-M standard let you sanitise media to recognised security levels without attaching the drives to a PC.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Part Number | H03-SATA2 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 3 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Άλλες εκδόσεις αυτού του μοντέλου
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
The duplicator includes an adapter for 3.5" SATA drives; 2.5" SATA drives fit the slot directly. No extra hardware or software is required for standalone operation.
System and Files copies only used space for speed; Whole HDD copies every sector including empty areas. Select based on whether you need a bit-for-bit clone or a faster transfer.
Each of the three slots can sustain up to 300MB/s simultaneously, so total throughput scales with the number of drives inserted.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Καμία γλώσσα δεν ταιριάζει.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;