Acumen Disc H07-SATA2 1-to-7 SATA Duplicator 300MB/s
- Hard Drive Duplicat…
- 1 to 7
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Acumen Disc
Standalone duplicator copies up to 11 SATA drives at 300 MB/s with seven erase modes including DoD 5220.22-M
The Acumen Disc H11-SATA2 copies up to eleven SATA hard drives or solid-state drives simultaneously without a host computer. It accepts both 3.5" and 2.5" drives directly in its slot-load bays and operates from a standard AC supply of 115-230 V at 50/60 Hz. The unit is intended for IT departments, forensic labs and data centres that need secure, high-volume duplication or sanitisation.
Each target slot maintains a data transfer rate of 300 MB/s, equivalent to 18 GB per minute, backed by 128 MB of buffer memory and the Athena controller. Two duplication modes are available: System and Files for quick copies, and Whole HDD for sector-by-sector imaging. The buffer smooths throughput during extended multi-drive jobs, preventing bottlenecks when all eleven bays are active.
Black slot-load bays hold drives securely without adapters, and a four-button panel navigates all functions. Seven erase modes cover Quick Erase, Full Erase, DoD 3-pass and 7-pass to the 5220.22-M standard, Secure Erase, Enhanced SSD Erase and HPA Erase. The standalone design removes software attack surfaces, while the 1-year parts-and-labour warranty plus lifetime technical support cover long-term service needs.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Part Number | H11-SATA2 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 11 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The unit uses a slot-load design with a 128 MB buffer and Athena Controller; no fan noise or thermal figures are published, so plan for normal rack airflow.
You need at least one source and one target SATA 3.5" or 2.5" HDD or SSD; no adapters or host PC are required.
Yes — the duplicator accepts any SATA 3.5" or 2.5" HDD or SSD regardless of link generation, copying sector-by-sector at up to 300 MB/s.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟