Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black standalone duplicator with 15 vertical SATA slots and 16x2 LCD

Acumen Disc

Acumen Disc H15-SATA150 Hard Drive Duplicator 15 Target 150MB/s

SKU CH-NYXH-WD4JW

Standalone duplicator copies up to 15 SATA drives at 150 MB/s with four DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 15

Target 1 to 15

Data Transfer Rate 150MB/s

  • Copies 15 drives simultaneously at 150 MB/s
  • Two copy modes: quick file or full sector duplication
  • Four erase modes including DoD 3-pass and 7-pass standards
  • Works with 3.5" and 2.5" SATA drives without adapters
  • Standalone operation via 16×2 LCD and 4-button controller

15-Target SATA Duplicator

The Acumen Disc H15-SATA150 is a standalone hard drive duplicator that copies up to 15 SATA drives simultaneously. It accepts both 3.5 and 2.5 inch HDDs and SSDs without adapters and operates through a 16 x 2 LCD with a four-button controller.

High-volume duplication and sanitisation

It suits IT departments, forensic labs and data centres that need to clone or securely erase many drives at once without a host PC. It is not for users who require interfaces other than SATA, or for environments that need network-connected management and remote job scheduling.

150 MB/s per slot transfer rate

Each of the 15 target ports sustains up to 150 MB/s during copy or erase operations. The Athena controller provides two copy modes and four erase modes, including DoD 3-pass and 7-pass patterns compliant with the 5220.22-M standard.

Pluspunten

  • Copies 15 drives simultaneously at 150 MB/s
  • Two copy modes: quick file or full sector duplication
  • Four erase modes including DoD 3-pass and 7-pass standards
  • Works with 3.5" and 2.5" SATA drives without adapters
  • Standalone operation via 16×2 LCD and 4-button controller

Specificaties

BrandAcumen Disc
TypeHard Drive Duplicator
Part NumberH15-SATA150
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 15
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drive
Data Transfer Rate150MB/s
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What drives must I already have to use the 15 target slots on the H15-SATA150 duplicator?

You need up to 15 SATA 3.5" hard drives or 2.5" SSDs; the unit accepts both form factors directly without an adapter.

Will the duplicator work with older SATA I drives I still keep in storage?

Yes, it copies SATA I drives at up to 150 MB/s per slot; the Athena controller handles the slower interface automatically.

How can I confirm the H15-SATA150 is copying correctly after I start a job?

The 16 x 2 LCD shows real-time progress, speed and pass/fail status for each of the 15 targets during duplication or erase.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.