Acumen Disc H01-SATA2 Hard Drive Duplicator 1 to 1 SATA 300MB/s
- Hard Drive Duplicat…
- Black
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Acumen Disc
Standalone duplicator copies up to seven SATA drives at 150 MB/s and offers four DoD-compliant erase modes
This standalone duplicator copies up to seven SATA 3.5-inch or 2.5-inch hard drives or solid-state drives simultaneously. It operates without a host computer, software or network connection. Transfer rates reach 150 MB per second per slot. The unit accepts drives of any capacity and supports both mechanical disks and SSDs directly in the slot-loading bays.
IT teams, forensic labs and data centres that need to clone or erase multiple SATA drives in an air-gapped environment will benefit from the two copy modes and four DoD-compliant erase modes. Buyers whose drives use interfaces other than SATA, or who require network-attached or software-managed duplication, should consider a different platform.
The single specification that decides fit is the 150 MB per second transfer rate delivered to each of the seven target slots. This throughput determines how quickly full-drive or quick-copy operations complete and whether the unit meets your production window. Power input accepts 115 to 230 V AC at 50 or 60 Hz.
| Brand | Acumen Disc |
|---|---|
| Part Number | H07-SATA150 |
| Type | Hard Drive Duplicator |
| Target | 1 to 7 |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drive |
| Data Transfer Rate | 150MB/s |
| Operating Type | Standalone |
| Connector | SATA |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The unit accepts both 2.5 and 3.5 inch SATA drives directly in its slot-load bays; no separate caddies or adapters are required for either form factor.
System-and-Files copies only used data for speed, while Whole-HDD clones every sector including empty space; pick the former for faster duplication, the latter for forensic or bit-for-bit images.
Each of the seven target slots can sustain up to 150 MB per second independently, so total aggregate throughput reaches seven times that figure when all bays are populated.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?