Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

Acumen Disc

Acumen Disc 1-to-7 SATA Duplicator H07-SATA150

SKU CH-PRGT-XNVDK

Standalone duplicator copies up to seven SATA drives at 150 MB/s and offers four DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Target1 to 7
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drive
  • Data Transfer Rate150MB/s
  • Operating TypeStandalone
  • ConnectorSATA

Data Transfer Rate 150MB/s

  • Copies seven drives simultaneously at 150 MB/s each
  • Two duplication modes: quick file copy or full sector image
  • Four erase modes including DoD 5220.22-M three-pass and seven-pass standards
  • Standalone operation with no host computer required for security
  • Slot-load design accepts 3.5" and 2.5" SATA drives without adapters

Duplicates up to 7 SATA drives

This standalone duplicator copies up to seven SATA 3.5-inch or 2.5-inch hard drives or solid-state drives simultaneously. It operates without a host computer, software or network connection. Transfer rates reach 150 MB per second per slot. The unit accepts drives of any capacity and supports both mechanical disks and SSDs directly in the slot-loading bays.

Suited for secure offline cloning and sanitisation

IT teams, forensic labs and data centres that need to clone or erase multiple SATA drives in an air-gapped environment will benefit from the two copy modes and four DoD-compliant erase modes. Buyers whose drives use interfaces other than SATA, or who require network-attached or software-managed duplication, should consider a different platform.

150 MB/s per-slot copy speed

The single specification that decides fit is the 150 MB per second transfer rate delivered to each of the seven target slots. This throughput determines how quickly full-drive or quick-copy operations complete and whether the unit meets your production window. Power input accepts 115 to 230 V AC at 50 or 60 Hz.

Fordele

  • Copies seven drives simultaneously at 150 MB/s each
  • Two duplication modes: quick file copy or full sector image
  • Four erase modes including DoD 5220.22-M three-pass and seven-pass standards
  • Standalone operation with no host computer required for security
  • Slot-load design accepts 3.5" and 2.5" SATA drives without adapters

Specifikationer

BrandAcumen Disc
Part NumberH07-SATA150
TypeHard Drive Duplicator
Target1 to 7
Supported MediaSATA Hard Drive Disk / SATA Solid State Drive
Data Transfer Rate150MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Does the duplicator ship with drive caddies or adapters for 2.5 and 3.5 inch SATA drives?

The unit accepts both 2.5 and 3.5 inch SATA drives directly in its slot-load bays; no separate caddies or adapters are required for either form factor.

Should I choose System-and-Files or Whole-HDD copy mode for my cloning task?

System-and-Files copies only used data for speed, while Whole-HDD clones every sector including empty space; pick the former for faster duplication, the latter for forensic or bit-for-bit images.

What does the 150 MB per second rate mean when I load seven drives at once?

Each of the seven target slots can sustain up to 150 MB per second independently, so total aggregate throughput reaches seven times that figure when all bays are populated.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.