Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Ribbon of 20 female-to-male jumper wires, 6 inches, 28 AWG

Adafruit

Adafruit Premium Female/Male Extension Jumper Wires 20 x 6" 28 AWG ADA1954

SKU CH-0DM5-VBK08

Twenty 28 AWG jumper wires at six inches each separate into individual extensions or stay together as a ribbon for tidy prototyping

  • TypePrototyping Products
  • 20-pin ribbon cable splits into individual jumpers or stays together for tidy wiring
  • 6 inch length gives comfortable reach across breadboards and perf boards
  • 28 AWG wire keeps connections light and flexible for prototyping
  • Female-to-male ends extend existing headers without soldering
  • 20 pieces in one pack cover multiple circuit points at once

Adafruit Jumper Wires 20 Pack

These premium extension jumper wires come as a 20-pin ribbon cable measuring six inches long with 28 AWG conductors. Each wire has a female connector on one end and a male connector on the other for extending existing connections. The ribbon can stay intact for tidy wiring or be separated into individual jumpers as needed.

Hobbyists and prototypers extending header pins

Makers who need to bridge female headers to male pins on development boards or breadboards will find these handy. Builders requiring longer reach than six inches or a different wire gauge should look at other options. Projects that demand soldered connections or high-current power distribution are not suited to these thin prototyping wires.

20-pin ribbon with female-to-male ends

The deciding specification is the 20-wire ribbon format with pre-crimped female and male terminations. This fixed six-inch length and 28 AWG thickness determine whether the wires fit your board spacing and current needs. If your layout needs a different pin count, length or wire size, this pack will not match.

Priekšrocības

  • 20-pin ribbon cable splits into individual jumpers or stays together for tidy wiring
  • 6 inch length gives comfortable reach across breadboards and perf boards
  • 28 AWG wire keeps connections light and flexible for prototyping
  • Female-to-male ends extend existing headers without soldering
  • 20 pieces in one pack cover multiple circuit points at once

Specifikācijas

TypePrototyping Products

Jautājumi par šo preci

How can I verify the 28 AWG jumpers are making solid contact after I plug them in?

Check that each female socket clicks onto the header pin and that the male end seats fully in the breadboard; a multimeter continuity test on a few wires will confirm the 28 AWG conductors are intact.

What exactly comes in the pack and is anything else required to start prototyping?

The pack contains a 20-wire ribbon cable with pre-crimped female and male connectors; no extra parts are needed, though you may want a breadboard or header strip to plug them into.

Should I choose the 6-inch length or a different size for my Arduino shield project?

This listing is the 6-inch version only; if you need longer or shorter reach you would have to order a different Adafruit jumper set.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.