Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Ribbon of 20 female-to-male jumper wires, 6 inches, 28 AWG

Adafruit

Adafruit Premium Female/Male Extension Jumper Wires 20 x 6" 28 AWG ADA1954

SKU CH-0DM5-VBK08

Twenty 28 AWG jumper wires at six inches each separate into individual extensions or stay together as a ribbon for tidy prototyping

  • TypePrototyping Products
  • 20-pin ribbon cable splits into individual jumpers or stays together for tidy wiring
  • 6 inch length gives comfortable reach across breadboards and perf boards
  • 28 AWG wire keeps connections light and flexible for prototyping
  • Female-to-male ends extend existing headers without soldering
  • 20 pieces in one pack cover multiple circuit points at once

Adafruit Jumper Wires 20 Pack

These premium extension jumper wires come as a 20-pin ribbon cable measuring six inches long with 28 AWG conductors. Each wire has a female connector on one end and a male connector on the other for extending existing connections. The ribbon can stay intact for tidy wiring or be separated into individual jumpers as needed.

Hobbyists and prototypers extending header pins

Makers who need to bridge female headers to male pins on development boards or breadboards will find these handy. Builders requiring longer reach than six inches or a different wire gauge should look at other options. Projects that demand soldered connections or high-current power distribution are not suited to these thin prototyping wires.

20-pin ribbon with female-to-male ends

The deciding specification is the 20-wire ribbon format with pre-crimped female and male terminations. This fixed six-inch length and 28 AWG thickness determine whether the wires fit your board spacing and current needs. If your layout needs a different pin count, length or wire size, this pack will not match.

Přednosti

  • 20-pin ribbon cable splits into individual jumpers or stays together for tidy wiring
  • 6 inch length gives comfortable reach across breadboards and perf boards
  • 28 AWG wire keeps connections light and flexible for prototyping
  • Female-to-male ends extend existing headers without soldering
  • 20 pieces in one pack cover multiple circuit points at once

Specifikace

TypePrototyping Products

Otázky k tomuto produktu

How can I verify the 28 AWG jumpers are making solid contact after I plug them in?

Check that each female socket clicks onto the header pin and that the male end seats fully in the breadboard; a multimeter continuity test on a few wires will confirm the 28 AWG conductors are intact.

What exactly comes in the pack and is anything else required to start prototyping?

The pack contains a 20-wire ribbon cable with pre-crimped female and male connectors; no extra parts are needed, though you may want a breadboard or header strip to plug them into.

Should I choose the 6-inch length or a different size for my Arduino shield project?

This listing is the 6-inch version only; if you need longer or shorter reach you would have to order a different Adafruit jumper set.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.