저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Ribbon of 20 female-to-male jumper wires, 6 inches, 28 AWG

Adafruit

Adafruit Premium Female/Male Extension Jumper Wires 20 x 6" 28 AWG ADA1954

SKU CH-0DM5-VBK08

Twenty 28 AWG jumper wires at six inches each separate into individual extensions or stay together as a ribbon for tidy prototyping

  • TypePrototyping Products
  • 20-pin ribbon cable splits into individual jumpers or stays together for tidy wiring
  • 6 inch length gives comfortable reach across breadboards and perf boards
  • 28 AWG wire keeps connections light and flexible for prototyping
  • Female-to-male ends extend existing headers without soldering
  • 20 pieces in one pack cover multiple circuit points at once

Adafruit Jumper Wires 20 Pack

These premium extension jumper wires come as a 20-pin ribbon cable measuring six inches long with 28 AWG conductors. Each wire has a female connector on one end and a male connector on the other for extending existing connections. The ribbon can stay intact for tidy wiring or be separated into individual jumpers as needed.

Hobbyists and prototypers extending header pins

Makers who need to bridge female headers to male pins on development boards or breadboards will find these handy. Builders requiring longer reach than six inches or a different wire gauge should look at other options. Projects that demand soldered connections or high-current power distribution are not suited to these thin prototyping wires.

20-pin ribbon with female-to-male ends

The deciding specification is the 20-wire ribbon format with pre-crimped female and male terminations. This fixed six-inch length and 28 AWG thickness determine whether the wires fit your board spacing and current needs. If your layout needs a different pin count, length or wire size, this pack will not match.

주요 특징

  • 20-pin ribbon cable splits into individual jumpers or stays together for tidy wiring
  • 6 inch length gives comfortable reach across breadboards and perf boards
  • 28 AWG wire keeps connections light and flexible for prototyping
  • Female-to-male ends extend existing headers without soldering
  • 20 pieces in one pack cover multiple circuit points at once

사양

TypePrototyping Products

이 상품에 대한 질문

How can I verify the 28 AWG jumpers are making solid contact after I plug them in?

Check that each female socket clicks onto the header pin and that the male end seats fully in the breadboard; a multimeter continuity test on a few wires will confirm the 28 AWG conductors are intact.

What exactly comes in the pack and is anything else required to start prototyping?

The pack contains a 20-wire ribbon cable with pre-crimped female and male connectors; no extra parts are needed, though you may want a breadboard or header strip to plug them into.

Should I choose the 6-inch length or a different size for my Arduino shield project?

This listing is the 6-inch version only; if you need longer or shorter reach you would have to order a different Adafruit jumper set.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.