Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 1U rack power supply, 206 by 110 by 62 mm, forced-air cooling, IEC inlet, 12 V output terminals

AFRNDK

AFRNDK APW7 1800W 12V Mining PSU 1U

SKU CH-VA54-HZSR3

A 1U server power supply delivering 12 V at up to 1800 W with 95 % efficiency and automatic over-temperature shutdown

Options APW7 PSU

Skatīt vēl 2 konfigurācijas

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • Delivers 1800 W at 220–240 V input for high-density mining rigs
  • 95 % conversion efficiency reduces electricity cost versus 93.5 % designs
  • Automatic shutdown on over-temperature or circuit fault protects attached miners
  • Operates from -20 °C to 60 °C with forced-air cooling at 43 dB
  • Compact 1U form factor measures 206 × 110 × 62 mm and weighs 2.0 kg

High-efficiency DC power supply for ASIC miners

The AFRNDK APW7 delivers a single 12 V DC output rated at 1800 W when fed from a 200-240 V AC source. It is built by Bitmain for crypto mining rigs such as the Antminer S9, Z9, L3++, D9 and T9 series, plus compatible Innosilicon, Ebit and Avalon units. The unit accepts either 100-140 V or 200-240 V AC input and uses forced-air cooling rated at 43 dB.

Voltage-dependent output ceiling

At 110-120 V AC the maximum continuous power drops to 1000 W, so the full 1800 W rating is only available on 220-240 V mains. The power factor reaches 0.99 at full load and conversion efficiency is quoted at 95 percent, compared with 93.5 percent on the older APW3++ design. Over-temperature protection shuts the supply down automatically if internal temperatures exceed safe limits.

150 A headroom at 12 V

The 12.0-12.5 V output can supply up to 150 A continuously on the high-voltage input range, giving ample margin for dense miner configurations. Operating temperature spans -20 °C to 60 °C with 20-90 % non-condensing humidity. The 1U chassis measures 206 × 110 × 62 mm and weighs 2.0 kg. Builds requiring more than 1800 W or a redundant supply architecture will need additional units.

Priekšrocības

  • Delivers 1800 W at 220–240 V input for high-density mining rigs
  • 95 % conversion efficiency reduces electricity cost versus 93.5 % designs
  • Automatic shutdown on over-temperature or circuit fault protects attached miners
  • Operates from -20 °C to 60 °C with forced-air cooling at 43 dB
  • Compact 1U form factor measures 206 × 110 × 62 mm and weighs 2.0 kg

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will this PSU run on a standard 110 V household circuit?

Yes, it accepts 100–140 V AC, but maximum output is limited to 1000 W at that voltage range.

What efficiency can I expect at 220–240 V input?

The unit delivers 95 % conversion efficiency at full load on 200–240 V AC, compared with 93.5 % on the older APW3++ design.

Does it include protection against overheating?

Built-in overheat protection shuts the supply off automatically if internal temperature rises too high, safeguarding connected miners.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.