Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular silver power supply unit with ten six-pin connectors on the front face

AFRNDK

AFRNDK P21 3300W 12V 240A mining hardware

SKU CH-ZJ36-M607R MPN P21

Delivers up to 3600 W at 12 V with 93 % efficiency for Whatsminer M20S and M21S rigs

Options 3300W PSU for Whatsminer

Skatīt vēl 2 konfigurācijas

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • Delivers up to 3600W total power for demanding mining rigs
  • Operates on 185–300V input for stable global mains compatibility
  • Provides 10–14.5V adjustable output with up to 300A current capacity
  • Includes ten standard 6-pin buckle terminals for direct miner connection
  • Runs at 93% peak efficiency with short-circuit, over-current, over-voltage and over-temperature protection

Power Supply for Whatsminer M20S and M21S

The AFRNDK P21 delivers up to 3300W of continuous power with a 12V output rated at 240A. It accepts an input range of 185V to 300V at 50Hz or 60Hz and operates from -10°C to +50°C.

Ten 6-pin buckle terminals and built-in protections

Ten standard P6 connectors supply multiple hash boards simultaneously. Short-circuit, over-current, over-voltage and over-temperature safeguards shut the unit down before damage can spread. Peak efficiency reaches 93% under load.

Suits miners replacing a failed Whatsminer PSU

Technicians restoring M20S or M21S rigs can swap the unit directly after confirming the exact model with engineering support. Operations needing different voltage rails, connector counts or a wider input range should evaluate alternative power supplies.

Priekšrocības

  • Delivers up to 3600W total power for demanding mining rigs
  • Operates on 185–300V input for stable global mains compatibility
  • Provides 10–14.5V adjustable output with up to 300A current capacity
  • Includes ten standard 6-pin buckle terminals for direct miner connection
  • Runs at 93% peak efficiency with short-circuit, over-current, over-voltage and over-temperature protection

Specifikācijas

BrandWHATSMINER
ModelP21 Power Supply

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will this PSU work with a standard 185–300 V supply?

Yes, the input voltage range is 185–300 V at 50/60 Hz, so it accepts common single-phase mains within that window.

Can it power a Whatsminer M20S or M21S without extra cables?

It includes ten standard 6-pin buckle terminals (P6) rated for up to 300 A total, matching the connectors used by those miners.

What protection features are built in?

The unit provides short-circuit, over-current, over-voltage and over-temperature protection to shut down safely under fault conditions.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.