Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular silver power supply unit with ten six-pin connectors on the front face

AFRNDK

AFRNDK P21 3300W 12V 240A mining hardware

SKU CH-ZJ36-M607R MPN P21

Delivers up to 3600 W at 12 V with 93 % efficiency for Whatsminer M20S and M21S rigs

Options 3300W PSU for Whatsminer

Vedeți celelalte 2 configurații

Versiunile tăiate există, dar nu sunt disponibile aici.

  • Delivers up to 3600W total power for demanding mining rigs
  • Operates on 185–300V input for stable global mains compatibility
  • Provides 10–14.5V adjustable output with up to 300A current capacity
  • Includes ten standard 6-pin buckle terminals for direct miner connection
  • Runs at 93% peak efficiency with short-circuit, over-current, over-voltage and over-temperature protection

Power Supply for Whatsminer M20S and M21S

The AFRNDK P21 delivers up to 3300W of continuous power with a 12V output rated at 240A. It accepts an input range of 185V to 300V at 50Hz or 60Hz and operates from -10°C to +50°C.

Ten 6-pin buckle terminals and built-in protections

Ten standard P6 connectors supply multiple hash boards simultaneously. Short-circuit, over-current, over-voltage and over-temperature safeguards shut the unit down before damage can spread. Peak efficiency reaches 93% under load.

Suits miners replacing a failed Whatsminer PSU

Technicians restoring M20S or M21S rigs can swap the unit directly after confirming the exact model with engineering support. Operations needing different voltage rails, connector counts or a wider input range should evaluate alternative power supplies.

Puncte forte

  • Delivers up to 3600W total power for demanding mining rigs
  • Operates on 185–300V input for stable global mains compatibility
  • Provides 10–14.5V adjustable output with up to 300A current capacity
  • Includes ten standard 6-pin buckle terminals for direct miner connection
  • Runs at 93% peak efficiency with short-circuit, over-current, over-voltage and over-temperature protection

Specificații

BrandWHATSMINER
ModelP21 Power Supply

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will this PSU work with a standard 185–300 V supply?

Yes, the input voltage range is 185–300 V at 50/60 Hz, so it accepts common single-phase mains within that window.

Can it power a Whatsminer M20S or M21S without extra cables?

It includes ten standard 6-pin buckle terminals (P6) rated for up to 300 A total, matching the connectors used by those miners.

What protection features are built in?

The unit provides short-circuit, over-current, over-voltage and over-temperature protection to shut down safely under fault conditions.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.