AFRNDK
AFRNDK iPollo G1 Mini 1.2GH/s with PSU mining hardware
Compact Cuckatoo32/31 miner delivers 1.2 GH/s at 100 W with included PSU
- Crypto AlgorithmCuckatoo32/31 Algorithm
- Hashrate1.2GH/s
- Power Consumption100
Options ipollo G1 Mini
- ipollo G1 Mini
- S9
- T17
- L3+
- A11 Pro
- L7
- 3300W PSU for Whatsminer
- APW9+ PSU
- APW12 PSU
- Q2S
- APW7 PSU
- ipollo B1L
Vedeți celelalte 2 configurații
Versiunile tăiate există, dar nu sunt disponibile aici.
- Efficient Grin mining at 1.2 GH/s with only 100 W power draw
- Compact 78×148×158 mm design weighs just 2.5 kg for easy home placement
- Cuckatoo32/31 algorithm support also enables MWC mining at 4.2 G hashrate
- Wired Ethernet link provides stable pool connectivity without wireless interference
- Optimal operation at 30 °C keeps noise low and reliability high
Compact Cuckatoo32/31 Miner
The AFRNDK iPollo G1 Mini is a desktop-scale mining unit built for the Cuckatoo32 and Cuckatoo31 algorithms. It targets Grin and MWC networks with a rated hashrate of 1.2GH/s and an observed rate of 1.4Gp/s within a ten-percent tolerance. An integrated power supply and Ethernet link keep the setup simple for home deployment.
Practical Power And Thermal Limits
The device draws approximately 100 watts with a tolerance of plus ten percent, so a standard household circuit can support it without special wiring. Operating temperature is specified at 30 degrees Celsius, meaning adequate room ventilation is required to sustain continuous operation. The Ethernet connection provides the only data path, so a wired network port must be available at the install site.
Deciding Specification Hashrate
The effective hashrate of 1.4Gp/s with a ten-percent variance is the single figure that determines whether this unit meets a miner’s profitability threshold. At 100 watts the efficiency ratio follows directly from that hashrate, so buyers can calculate daily yield against electricity cost using only these two numbers. No other specification alters the economic outcome for Cuckatoo32/31 mining.
Puncte forte
- Efficient Grin mining at 1.2 GH/s with only 100 W power draw
- Compact 78×148×158 mm design weighs just 2.5 kg for easy home placement
- Cuckatoo32/31 algorithm support also enables MWC mining at 4.2 G hashrate
- Wired Ethernet link provides stable pool connectivity without wireless interference
- Optimal operation at 30 °C keeps noise low and reliability high
Specificații
| Brand | iPollo |
|---|---|
| Series | G1 |
| Model | G1 MINI |
| Crypto Algorithm | Cuckatoo32/31 Algorithm |
| Hashrate | 1.2GH/s |
| Power Consumption | 100 |
Alte versiuni ale acestui model
5 în plus din aceeași gamă
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
AFRNDK iPollo B1L 60 TH/s SHA-256 ASIC Miner
- SHA-256
- Bitcoin (BTC)
Întrebări despre acest articol
What coins can this miner earn?
It targets Grin using the Cuckatoo32/31 algorithm at 1.4 Gp/s and is also compatible with MWC.
How much power does it draw from the wall?
Rated at 100 W with a tolerance of plus ten percent; the included PSU matches that load.
Will it fit on a desk and run quietly at home?
The chassis measures 78 by 148 by 158 mm and weighs 2.5 kg; optimal temperature is 30 °C for low-noise operation.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM








