Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Compact beige mining box with Ethernet port and integrated power supply, 78 by 148 by 158 millimetres

AFRNDK

AFRNDK iPollo G1 Mini 1.2GH/s with PSU mining hardware

SKU CH-6RZR-J6D6X

Compact Cuckatoo32/31 miner delivers 1.2 GH/s at 100 W with included PSU

  • Crypto AlgorithmCuckatoo32/31 Algorithm
  • Hashrate1.2GH/s
  • Power Consumption100

Options ipollo G1 Mini

Zobrazit dalších 2 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Efficient Grin mining at 1.2 GH/s with only 100 W power draw
  • Compact 78×148×158 mm design weighs just 2.5 kg for easy home placement
  • Cuckatoo32/31 algorithm support also enables MWC mining at 4.2 G hashrate
  • Wired Ethernet link provides stable pool connectivity without wireless interference
  • Optimal operation at 30 °C keeps noise low and reliability high

Compact Cuckatoo32/31 Miner

The AFRNDK iPollo G1 Mini is a desktop-scale mining unit built for the Cuckatoo32 and Cuckatoo31 algorithms. It targets Grin and MWC networks with a rated hashrate of 1.2GH/s and an observed rate of 1.4Gp/s within a ten-percent tolerance. An integrated power supply and Ethernet link keep the setup simple for home deployment.

Practical Power And Thermal Limits

The device draws approximately 100 watts with a tolerance of plus ten percent, so a standard household circuit can support it without special wiring. Operating temperature is specified at 30 degrees Celsius, meaning adequate room ventilation is required to sustain continuous operation. The Ethernet connection provides the only data path, so a wired network port must be available at the install site.

Deciding Specification Hashrate

The effective hashrate of 1.4Gp/s with a ten-percent variance is the single figure that determines whether this unit meets a miner’s profitability threshold. At 100 watts the efficiency ratio follows directly from that hashrate, so buyers can calculate daily yield against electricity cost using only these two numbers. No other specification alters the economic outcome for Cuckatoo32/31 mining.

Přednosti

  • Efficient Grin mining at 1.2 GH/s with only 100 W power draw
  • Compact 78×148×158 mm design weighs just 2.5 kg for easy home placement
  • Cuckatoo32/31 algorithm support also enables MWC mining at 4.2 G hashrate
  • Wired Ethernet link provides stable pool connectivity without wireless interference
  • Optimal operation at 30 °C keeps noise low and reliability high

Specifikace

BrandiPollo
SeriesG1
ModelG1 MINI
Crypto AlgorithmCuckatoo32/31 Algorithm
Hashrate1.2GH/s
Power Consumption100

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What coins can this miner earn?

It targets Grin using the Cuckatoo32/31 algorithm at 1.4 Gp/s and is also compatible with MWC.

How much power does it draw from the wall?

Rated at 100 W with a tolerance of plus ten percent; the included PSU matches that load.

Will it fit on a desk and run quietly at home?

The chassis measures 78 by 148 by 158 mm and weighs 2.5 kg; optimal temperature is 30 °C for low-noise operation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.