Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Compact beige mining box with Ethernet port and integrated power supply, 78 by 148 by 158 millimetres

AFRNDK

AFRNDK iPollo G1 Mini 1.2GH/s with PSU mining hardware

SKU CH-6RZR-J6D6X

Compact Cuckatoo32/31 miner delivers 1.2 GH/s at 100 W with included PSU

  • Crypto AlgorithmCuckatoo32/31 Algorithm
  • Hashrate1.2GH/s
  • Power Consumption100

Options ipollo G1 Mini

Vis 2 flere konfigurationer

De overstregede versioner findes, men er ikke på lager her.

  • Efficient Grin mining at 1.2 GH/s with only 100 W power draw
  • Compact 78×148×158 mm design weighs just 2.5 kg for easy home placement
  • Cuckatoo32/31 algorithm support also enables MWC mining at 4.2 G hashrate
  • Wired Ethernet link provides stable pool connectivity without wireless interference
  • Optimal operation at 30 °C keeps noise low and reliability high

Compact Cuckatoo32/31 Miner

The AFRNDK iPollo G1 Mini is a desktop-scale mining unit built for the Cuckatoo32 and Cuckatoo31 algorithms. It targets Grin and MWC networks with a rated hashrate of 1.2GH/s and an observed rate of 1.4Gp/s within a ten-percent tolerance. An integrated power supply and Ethernet link keep the setup simple for home deployment.

Practical Power And Thermal Limits

The device draws approximately 100 watts with a tolerance of plus ten percent, so a standard household circuit can support it without special wiring. Operating temperature is specified at 30 degrees Celsius, meaning adequate room ventilation is required to sustain continuous operation. The Ethernet connection provides the only data path, so a wired network port must be available at the install site.

Deciding Specification Hashrate

The effective hashrate of 1.4Gp/s with a ten-percent variance is the single figure that determines whether this unit meets a miner’s profitability threshold. At 100 watts the efficiency ratio follows directly from that hashrate, so buyers can calculate daily yield against electricity cost using only these two numbers. No other specification alters the economic outcome for Cuckatoo32/31 mining.

Fordele

  • Efficient Grin mining at 1.2 GH/s with only 100 W power draw
  • Compact 78×148×158 mm design weighs just 2.5 kg for easy home placement
  • Cuckatoo32/31 algorithm support also enables MWC mining at 4.2 G hashrate
  • Wired Ethernet link provides stable pool connectivity without wireless interference
  • Optimal operation at 30 °C keeps noise low and reliability high

Specifikationer

BrandiPollo
SeriesG1
ModelG1 MINI
Crypto AlgorithmCuckatoo32/31 Algorithm
Hashrate1.2GH/s
Power Consumption100

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What coins can this miner earn?

It targets Grin using the Cuckatoo32/31 algorithm at 1.4 Gp/s and is also compatible with MWC.

How much power does it draw from the wall?

Rated at 100 W with a tolerance of plus ten percent; the included PSU matches that load.

Will it fit on a desk and run quietly at home?

The chassis measures 78 by 148 by 158 mm and weighs 2.5 kg; optimal temperature is 30 °C for low-noise operation.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.