Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa

AFRNDK

AFRNDK P21 3300W 12V 240A mining hardware

SKU CH-ZJ36-M607R MPN P21

Delivers up to 3600 W at 12 V with 93 % efficiency for Whatsminer M20S and M21S rigs

Options 3300W PSU for Whatsminer

Zobraziť ďalších 2 konfigurácií

Preškrtnuté verzie existujú, ale nie sú tu skladom.

  • Delivers up to 3600W total power for demanding mining rigs
  • Operates on 185–300V input for stable global mains compatibility
  • Provides 10–14.5V adjustable output with up to 300A current capacity
  • Includes ten standard 6-pin buckle terminals for direct miner connection
  • Runs at 93% peak efficiency with short-circuit, over-current, over-voltage and over-temperature protection

Power Supply for Whatsminer M20S and M21S

The AFRNDK P21 delivers up to 3300W of continuous power with a 12V output rated at 240A. It accepts an input range of 185V to 300V at 50Hz or 60Hz and operates from -10°C to +50°C.

Ten 6-pin buckle terminals and built-in protections

Ten standard P6 connectors supply multiple hash boards simultaneously. Short-circuit, over-current, over-voltage and over-temperature safeguards shut the unit down before damage can spread. Peak efficiency reaches 93% under load.

Suits miners replacing a failed Whatsminer PSU

Technicians restoring M20S or M21S rigs can swap the unit directly after confirming the exact model with engineering support. Operations needing different voltage rails, connector counts or a wider input range should evaluate alternative power supplies.

Prednosti

  • Delivers up to 3600W total power for demanding mining rigs
  • Operates on 185–300V input for stable global mains compatibility
  • Provides 10–14.5V adjustable output with up to 300A current capacity
  • Includes ten standard 6-pin buckle terminals for direct miner connection
  • Runs at 93% peak efficiency with short-circuit, over-current, over-voltage and over-temperature protection

Špecifikácie

BrandWHATSMINER
ModelP21 Power Supply

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will this PSU work with a standard 185–300 V supply?

Yes, the input voltage range is 185–300 V at 50/60 Hz, so it accepts common single-phase mains within that window.

Can it power a Whatsminer M20S or M21S without extra cables?

It includes ten standard 6-pin buckle terminals (P6) rated for up to 300 A total, matching the connectors used by those miners.

What protection features are built in?

The unit provides short-circuit, over-current, over-voltage and over-temperature protection to shut down safely under fault conditions.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.