Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Rectangular silver power supply unit with fan grille, 249 by 250 by 48.5 mm, 3.2 kg

AFRNDK

AFRNDK APW9+ 3600W PSU 220-240V 10A 67dBA

SKU CH-3895-SGWES

3600 watt replacement power supply for Bitmain Antminer S17 and T17 series, 220 to 240 volt input, force-air cooled at 67 dBA

Options APW9+ PSU

Zobraziť ďalších 2 konfigurácií

Preškrtnuté verzie existujú, ale nie sú tu skladom.

  • Delivers 3600 W for Antminer S17 and T17 series
  • Operates on 220-240 V input at 50/60 Hz
  • Draws 10 A at full load for stable mining
  • Force-air cooling keeps unit at 67 dBA noise level
  • Compact 249 x 250 x 48.5 mm frame weighs 3.2 kg

Direct replacement for Antminer S17 series

This authentic APW9+ unit delivers 3600 watt output for Bitmain Antminer S17e, T17e, S17+ and T17+ models. It accepts 220 to 240 volt input at 50 or 60 hertz and draws 10 ampere. The supply is built as a drop-in spare for miners whose original unit has failed.

Sustained load behaviour

Force-air cooling moves heat through the 249 by 250 by 48.5 millimetre chassis while the miner runs continuously. Acoustic output sits at 67 dBA under full load. The 3.2 kilogramme weight reflects a dense internal layout designed for non-stop operation rather than short bursts.

Installation notes

The enclosure matches the original mounting points so the swap takes minutes with basic hand tools. Ensure the 220 to 240 volt circuit can provide 10 ampere before powering on. The main risk is connecting the unit to an undersized breaker or using cables rated below the required current.

Prednosti

  • Delivers 3600 W for Antminer S17 and T17 series
  • Operates on 220-240 V input at 50/60 Hz
  • Draws 10 A at full load for stable mining
  • Force-air cooling keeps unit at 67 dBA noise level
  • Compact 249 x 250 x 48.5 mm frame weighs 3.2 kg

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How loud is the APW9+ when it runs continuously at full load?

The unit is rated at 67 dBA under forced-air cooling, so expect a noticeable but steady fan noise during 24/7 operation.

Which connectors or cables must I already have to install this PSU in an Antminer S17+?

The PSU uses the standard Bitmain edge-connector interface; you need the matching hash-board power cables and the control-board lead that come with the miner.

Will the APW9+ fit and power an older Antminer S17 without modification?

Yes — it is a direct 3600 W replacement for S17, T17, S17+ and T17+ models and shares the same 249 x 250 x 48.5 mm footprint.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.