Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Rectangular silver power supply unit with fan grille, 249 by 250 by 48.5 mm, 3.2 kg

AFRNDK

AFRNDK APW9+ 3600W PSU 220-240V 10A 67dBA

SKU CH-3895-SGWES

3600 watt replacement power supply for Bitmain Antminer S17 and T17 series, 220 to 240 volt input, force-air cooled at 67 dBA

Options APW9+ PSU

Prikaži još 2 konfiguracija

Precrtane verzije postoje, ali nisu dostupne ovdje.

  • Delivers 3600 W for Antminer S17 and T17 series
  • Operates on 220-240 V input at 50/60 Hz
  • Draws 10 A at full load for stable mining
  • Force-air cooling keeps unit at 67 dBA noise level
  • Compact 249 x 250 x 48.5 mm frame weighs 3.2 kg

Direct replacement for Antminer S17 series

This authentic APW9+ unit delivers 3600 watt output for Bitmain Antminer S17e, T17e, S17+ and T17+ models. It accepts 220 to 240 volt input at 50 or 60 hertz and draws 10 ampere. The supply is built as a drop-in spare for miners whose original unit has failed.

Sustained load behaviour

Force-air cooling moves heat through the 249 by 250 by 48.5 millimetre chassis while the miner runs continuously. Acoustic output sits at 67 dBA under full load. The 3.2 kilogramme weight reflects a dense internal layout designed for non-stop operation rather than short bursts.

Installation notes

The enclosure matches the original mounting points so the swap takes minutes with basic hand tools. Ensure the 220 to 240 volt circuit can provide 10 ampere before powering on. The main risk is connecting the unit to an undersized breaker or using cables rated below the required current.

Istaknuto

  • Delivers 3600 W for Antminer S17 and T17 series
  • Operates on 220-240 V input at 50/60 Hz
  • Draws 10 A at full load for stable mining
  • Force-air cooling keeps unit at 67 dBA noise level
  • Compact 249 x 250 x 48.5 mm frame weighs 3.2 kg

Specifikacije

Za ovaj artikl još nisu objavljene specifikacije.

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

How loud is the APW9+ when it runs continuously at full load?

The unit is rated at 67 dBA under forced-air cooling, so expect a noticeable but steady fan noise during 24/7 operation.

Which connectors or cables must I already have to install this PSU in an Antminer S17+?

The PSU uses the standard Bitmain edge-connector interface; you need the matching hash-board power cables and the control-board lead that come with the miner.

Will the APW9+ fit and power an older Antminer S17 without modification?

Yes — it is a direct 3600 W replacement for S17, T17, S17+ and T17+ models and shares the same 249 x 250 x 48.5 mm footprint.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.