Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Rectangular silver power supply unit with fan grille, 249 by 250 by 48.5 mm, 3.2 kg

AFRNDK

AFRNDK APW9+ 3600W PSU 220-240V 10A 67dBA

SKU CH-3895-SGWES

3600 watt replacement power supply for Bitmain Antminer S17 and T17 series, 220 to 240 volt input, force-air cooled at 67 dBA

Options APW9+ PSU

Vis 2 flere konfigurasjoner

Overstrøkne versjoner finnes, men er ikke på lager her.

  • Delivers 3600 W for Antminer S17 and T17 series
  • Operates on 220-240 V input at 50/60 Hz
  • Draws 10 A at full load for stable mining
  • Force-air cooling keeps unit at 67 dBA noise level
  • Compact 249 x 250 x 48.5 mm frame weighs 3.2 kg

Direct replacement for Antminer S17 series

This authentic APW9+ unit delivers 3600 watt output for Bitmain Antminer S17e, T17e, S17+ and T17+ models. It accepts 220 to 240 volt input at 50 or 60 hertz and draws 10 ampere. The supply is built as a drop-in spare for miners whose original unit has failed.

Sustained load behaviour

Force-air cooling moves heat through the 249 by 250 by 48.5 millimetre chassis while the miner runs continuously. Acoustic output sits at 67 dBA under full load. The 3.2 kilogramme weight reflects a dense internal layout designed for non-stop operation rather than short bursts.

Installation notes

The enclosure matches the original mounting points so the swap takes minutes with basic hand tools. Ensure the 220 to 240 volt circuit can provide 10 ampere before powering on. The main risk is connecting the unit to an undersized breaker or using cables rated below the required current.

Høydepunkter

  • Delivers 3600 W for Antminer S17 and T17 series
  • Operates on 220-240 V input at 50/60 Hz
  • Draws 10 A at full load for stable mining
  • Force-air cooling keeps unit at 67 dBA noise level
  • Compact 249 x 250 x 48.5 mm frame weighs 3.2 kg

Spesifikasjoner

Ingen publiserte spesifikasjoner for denne varen ennå.

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

How loud is the APW9+ when it runs continuously at full load?

The unit is rated at 67 dBA under forced-air cooling, so expect a noticeable but steady fan noise during 24/7 operation.

Which connectors or cables must I already have to install this PSU in an Antminer S17+?

The PSU uses the standard Bitmain edge-connector interface; you need the matching hash-board power cables and the control-board lead that come with the miner.

Will the APW9+ fit and power an older Antminer S17 without modification?

Yes — it is a direct 3600 W replacement for S17, T17, S17+ and T17+ models and shares the same 249 x 250 x 48.5 mm footprint.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.