Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Compact rectangular ASIC miner in matte grey metal with front grille and rear ports

AFRNDK

AFRNDK DG HOME 1 2.1G 630W mining hardware

SKU CH-2QYR-8SY78

ASIC Scrypt miner delivering 2.1 GH/s for LTC, DOGE and BELLS at 630 W with 50 dB noise

  • TypeMining Machine/Miner
  • Compatible CurrencyDogecoin (DOGE)
  • Mining HardwareASIC
  • Hashrate2100M
  • Noise level50dB
  • Power Consumption630W
  • Scrypt algorithm mines LTC, DOGE and BELS simultaneously
  • 2100 MH/s hashrate at ±3 % tolerance
  • 630 W wall power at 0.3 J/MH efficiency
  • 50 dB noise level suits home environments
  • 110–220 V AC input with RJ45 10/100M networking

Elphapex DG Home 1 Scrypt ASIC Miner

The Elphapex DG Home 1 is an ASIC miner built for the Scrypt algorithm, targeting Litecoin, Dogecoin and Bells. It delivers a nominal hashrate of 21000 MH/s with a ±3% tolerance, drawing 630 W at the wall with a ±10% variance. The unit operates on 110–220 V AC input at 47–63 Hz and emits roughly 50 dB of noise.

Installation notes and common pitfalls

The miner connects to the network through a single RJ45 Ethernet 10/100M port and weighs 10.3 kg net, 12.1 kg gross. Because it only requires a standard AC mains connection within the 110–220 V range, setup is straightforward: plug in power, attach Ethernet, then configure the pool via the web interface. The most frequent issue is an unstable or undersized power circuit that trips breakers when the 630 W draw is sustained.

Practical limits of the Scrypt ASIC platform

Efficiency is rated at 0.3 J/MH ±10% at 25 °C ambient, so performance will degrade if intake air exceeds that temperature. The 10/100M Ethernet link caps pool communication at 100 Mbps, which is adequate for stratum traffic but rules out any high-bandwidth monitoring. Hashrate variance of ±3% and power variance of ±10% mean actual daily revenue can swing noticeably from the nominal figures.

Priekšrocības

  • Scrypt algorithm mines LTC, DOGE and BELS simultaneously
  • 2100 MH/s hashrate at ±3 % tolerance
  • 630 W wall power at 0.3 J/MH efficiency
  • 50 dB noise level suits home environments
  • 110–220 V AC input with RJ45 10/100M networking

Specifikācijas

BrandElphapex
SeriesDG HOME 1
ModelDG HOME 1
TypeMining Machine/Miner
Compatible CurrencyDogecoin (DOGE)
Mining HardwareASIC
Hashrate2100M
Noise level50dB
Power Consumption630W

Jautājumi par šo preci

What power supply and outlet do I need for this miner?

The unit accepts 110-220V AC at 47-63Hz and draws up to 10A. A standard household outlet or a PDU rated for at least 10A is sufficient.

How loud is 50dB in a home setting?

50dB is comparable to a quiet conversation or a refrigerator hum. It is generally acceptable for a home office or basement but may be noticeable in a bedroom.

Which coins can this ASIC mine and what algorithm does it use?

It mines Scrypt-based coins — specifically Litecoin, Dogecoin, and Bells — with a hashrate of 21000 MH/s ±3%.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.