Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Compact rectangular ASIC miner in matte grey metal with front grille and rear ports

AFRNDK

AFRNDK DG HOME 1 2.1G 630W mining hardware

SKU CH-2QYR-8SY78

ASIC Scrypt miner delivering 2.1 GH/s for LTC, DOGE and BELLS at 630 W with 50 dB noise

  • TypeMining Machine/Miner
  • Compatible CurrencyDogecoin (DOGE)
  • Mining HardwareASIC
  • Hashrate2100M
  • Noise level50dB
  • Power Consumption630W
  • Scrypt algorithm mines LTC, DOGE and BELS simultaneously
  • 2100 MH/s hashrate at ±3 % tolerance
  • 630 W wall power at 0.3 J/MH efficiency
  • 50 dB noise level suits home environments
  • 110–220 V AC input with RJ45 10/100M networking

Elphapex DG Home 1 Scrypt ASIC Miner

The Elphapex DG Home 1 is an ASIC miner built for the Scrypt algorithm, targeting Litecoin, Dogecoin and Bells. It delivers a nominal hashrate of 21000 MH/s with a ±3% tolerance, drawing 630 W at the wall with a ±10% variance. The unit operates on 110–220 V AC input at 47–63 Hz and emits roughly 50 dB of noise.

Installation notes and common pitfalls

The miner connects to the network through a single RJ45 Ethernet 10/100M port and weighs 10.3 kg net, 12.1 kg gross. Because it only requires a standard AC mains connection within the 110–220 V range, setup is straightforward: plug in power, attach Ethernet, then configure the pool via the web interface. The most frequent issue is an unstable or undersized power circuit that trips breakers when the 630 W draw is sustained.

Practical limits of the Scrypt ASIC platform

Efficiency is rated at 0.3 J/MH ±10% at 25 °C ambient, so performance will degrade if intake air exceeds that temperature. The 10/100M Ethernet link caps pool communication at 100 Mbps, which is adequate for stratum traffic but rules out any high-bandwidth monitoring. Hashrate variance of ±3% and power variance of ±10% mean actual daily revenue can swing noticeably from the nominal figures.

Pluspunten

  • Scrypt algorithm mines LTC, DOGE and BELS simultaneously
  • 2100 MH/s hashrate at ±3 % tolerance
  • 630 W wall power at 0.3 J/MH efficiency
  • 50 dB noise level suits home environments
  • 110–220 V AC input with RJ45 10/100M networking

Specificaties

BrandElphapex
SeriesDG HOME 1
ModelDG HOME 1
TypeMining Machine/Miner
Compatible CurrencyDogecoin (DOGE)
Mining HardwareASIC
Hashrate2100M
Noise level50dB
Power Consumption630W

Vragen over dit artikel

What power supply and outlet do I need for this miner?

The unit accepts 110-220V AC at 47-63Hz and draws up to 10A. A standard household outlet or a PDU rated for at least 10A is sufficient.

How loud is 50dB in a home setting?

50dB is comparable to a quiet conversation or a refrigerator hum. It is generally acceptable for a home office or basement but may be noticeable in a bedroom.

Which coins can this ASIC mine and what algorithm does it use?

It mines Scrypt-based coins — specifically Litecoin, Dogecoin, and Bells — with a hashrate of 21000 MH/s ±3%.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.