We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular ASIC miner in matte grey metal with front grille and rear ports

AFRNDK

AFRNDK DG HOME 1 2.1G 630W mining hardware

SKU CH-2QYR-8SY78

ASIC Scrypt miner delivering 2.1 GH/s for LTC, DOGE and BELLS at 630 W with 50 dB noise

  • TypeMining Machine/Miner
  • Compatible CurrencyDogecoin (DOGE)
  • Mining HardwareASIC
  • Hashrate2100M
  • Noise level50dB
  • Power Consumption630W
  • Scrypt algorithm mines LTC, DOGE and BELS simultaneously
  • 2100 MH/s hashrate at ±3 % tolerance
  • 630 W wall power at 0.3 J/MH efficiency
  • 50 dB noise level suits home environments
  • 110–220 V AC input with RJ45 10/100M networking

Elphapex DG Home 1 Scrypt ASIC Miner

The Elphapex DG Home 1 is an ASIC miner built for the Scrypt algorithm, targeting Litecoin, Dogecoin and Bells. It delivers a nominal hashrate of 21000 MH/s with a ±3% tolerance, drawing 630 W at the wall with a ±10% variance. The unit operates on 110–220 V AC input at 47–63 Hz and emits roughly 50 dB of noise.

Installation notes and common pitfalls

The miner connects to the network through a single RJ45 Ethernet 10/100M port and weighs 10.3 kg net, 12.1 kg gross. Because it only requires a standard AC mains connection within the 110–220 V range, setup is straightforward: plug in power, attach Ethernet, then configure the pool via the web interface. The most frequent issue is an unstable or undersized power circuit that trips breakers when the 630 W draw is sustained.

Practical limits of the Scrypt ASIC platform

Efficiency is rated at 0.3 J/MH ±10% at 25 °C ambient, so performance will degrade if intake air exceeds that temperature. The 10/100M Ethernet link caps pool communication at 100 Mbps, which is adequate for stratum traffic but rules out any high-bandwidth monitoring. Hashrate variance of ±3% and power variance of ±10% mean actual daily revenue can swing noticeably from the nominal figures.

Highlights

  • Scrypt algorithm mines LTC, DOGE and BELS simultaneously
  • 2100 MH/s hashrate at ±3 % tolerance
  • 630 W wall power at 0.3 J/MH efficiency
  • 50 dB noise level suits home environments
  • 110–220 V AC input with RJ45 10/100M networking

Specifications

BrandElphapex
SeriesDG HOME 1
ModelDG HOME 1
TypeMining Machine/Miner
Compatible CurrencyDogecoin (DOGE)
Mining HardwareASIC
Hashrate2100M
Noise level50dB
Power Consumption630W

Questions about this item

What power supply and outlet do I need for this miner?

The unit accepts 110-220V AC at 47-63Hz and draws up to 10A. A standard household outlet or a PDU rated for at least 10A is sufficient.

How loud is 50dB in a home setting?

50dB is comparable to a quiet conversation or a refrigerator hum. It is generally acceptable for a home office or basement but may be noticeable in a bedroom.

Which coins can this ASIC mine and what algorithm does it use?

It mines Scrypt-based coins — specifically Litecoin, Dogecoin, and Bells — with a hashrate of 21000 MH/s ±3%.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.