Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Chrome 90-degree compression elbow fitting with knurled collars for 16mm hard tube

Alphacool

Alphacool HT 16mm HardTube Compression Fitting 90° Elbow Chrome 17297

SKU CH-KZ1B-XGSJS

Connects 16 mm hard tubes at a 90° angle with a chrome compression finish

  • TypeFittings

Color Chrome

  • 90° elbow routes hard tubing cleanly around tight bends
  • Compression design seals 16 mm acrylic, brass, borosilicate or carbon tubes securely
  • Knurled collars allow firm hand-tightening without extra tools
  • Chrome finish resists fading and peeling for long-lasting appearance
  • Alphacool branding on body and collars adds a professional aesthetic

16 mm Hard-Tube 90° Elbow

This chrome compression fitting joins 16 mm acrylic, brass, borosilicate or carbon tubes at a right angle. It suits custom-loop builders who need a secure, leak-tested connection in tight routing spaces. The knurled collars allow tool-free tightening during assembly. Part number 17297 identifies the exact component for repeat orders.

Sustained-loop reliability

The new application process prevents the chrome finish from fading or peeling after months of continuous coolant flow and thermal cycling. Alphacool branding on the body and collars remains legible, preserving a professional aesthetic throughout the loop's service life. No degradation of the sealing surfaces is introduced by the coating method.

16 mm tube compatibility only

This fitting accepts 16 mm outer-diameter hard tubes and cannot be used with smaller or larger diameters or with soft tubing. Builders planning mixed-size runs must source matching fittings for each tube size separately.

Priekšrocības

  • 90° elbow routes hard tubing cleanly around tight bends
  • Compression design seals 16 mm acrylic, brass, borosilicate or carbon tubes securely
  • Knurled collars allow firm hand-tightening without extra tools
  • Chrome finish resists fading and peeling for long-lasting appearance
  • Alphacool branding on body and collars adds a professional aesthetic

Specifikācijas

TypeFittings

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the 90° elbow fitting add noticeable flow resistance or heat in a loop running continuously?

The fitting is a passive component with no moving parts and does not generate heat; any flow restriction from the 90° bend is minimal in a properly designed custom loop.

What tube size and material must I already have for this 16 mm compression fitting to work?

You need 16 mm outer-diameter hard tubing made of acrylic, brass, borosilicate glass or carbon; the knurled compression collars seal directly on that tube size.

Will the chrome finish on this 17297 fitting match older Alphacool fittings already in my build?

Alphacool uses a consistent chrome application process across the HT series so the finish should coordinate with existing Alphacool chrome components.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.