Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Chrome 90-degree compression elbow fitting with knurled collars for 16mm hard tube

Alphacool

Alphacool HT 16mm HardTube Compression Fitting 90° Elbow Chrome 17297

SKU CH-KZ1B-XGSJS

Connects 16 mm hard tubes at a 90° angle with a chrome compression finish

  • TypeFittings

Color Chrome

  • 90° elbow routes hard tubing cleanly around tight bends
  • Compression design seals 16 mm acrylic, brass, borosilicate or carbon tubes securely
  • Knurled collars allow firm hand-tightening without extra tools
  • Chrome finish resists fading and peeling for long-lasting appearance
  • Alphacool branding on body and collars adds a professional aesthetic

16 mm Hard-Tube 90° Elbow

This chrome compression fitting joins 16 mm acrylic, brass, borosilicate or carbon tubes at a right angle. It suits custom-loop builders who need a secure, leak-tested connection in tight routing spaces. The knurled collars allow tool-free tightening during assembly. Part number 17297 identifies the exact component for repeat orders.

Sustained-loop reliability

The new application process prevents the chrome finish from fading or peeling after months of continuous coolant flow and thermal cycling. Alphacool branding on the body and collars remains legible, preserving a professional aesthetic throughout the loop's service life. No degradation of the sealing surfaces is introduced by the coating method.

16 mm tube compatibility only

This fitting accepts 16 mm outer-diameter hard tubes and cannot be used with smaller or larger diameters or with soft tubing. Builders planning mixed-size runs must source matching fittings for each tube size separately.

Pluspunten

  • 90° elbow routes hard tubing cleanly around tight bends
  • Compression design seals 16 mm acrylic, brass, borosilicate or carbon tubes securely
  • Knurled collars allow firm hand-tightening without extra tools
  • Chrome finish resists fading and peeling for long-lasting appearance
  • Alphacool branding on body and collars adds a professional aesthetic

Specificaties

TypeFittings

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does the 90° elbow fitting add noticeable flow resistance or heat in a loop running continuously?

The fitting is a passive component with no moving parts and does not generate heat; any flow restriction from the 90° bend is minimal in a properly designed custom loop.

What tube size and material must I already have for this 16 mm compression fitting to work?

You need 16 mm outer-diameter hard tubing made of acrylic, brass, borosilicate glass or carbon; the knurled compression collars seal directly on that tube size.

Will the chrome finish on this 17297 fitting match older Alphacool fittings already in my build?

Alphacool uses a consistent chrome application process across the HT series so the finish should coordinate with existing Alphacool chrome components.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.