Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Chrome 90-degree compression elbow fitting with knurled collars for 16mm hard tube

Alphacool

Alphacool HT 16mm HardTube Compression Fitting 90° Elbow Chrome 17297

SKU CH-KZ1B-XGSJS

Connects 16 mm hard tubes at a 90° angle with a chrome compression finish

  • TypeFittings

Color Chrome

  • 90° elbow routes hard tubing cleanly around tight bends
  • Compression design seals 16 mm acrylic, brass, borosilicate or carbon tubes securely
  • Knurled collars allow firm hand-tightening without extra tools
  • Chrome finish resists fading and peeling for long-lasting appearance
  • Alphacool branding on body and collars adds a professional aesthetic

16 mm Hard-Tube 90° Elbow

This chrome compression fitting joins 16 mm acrylic, brass, borosilicate or carbon tubes at a right angle. It suits custom-loop builders who need a secure, leak-tested connection in tight routing spaces. The knurled collars allow tool-free tightening during assembly. Part number 17297 identifies the exact component for repeat orders.

Sustained-loop reliability

The new application process prevents the chrome finish from fading or peeling after months of continuous coolant flow and thermal cycling. Alphacool branding on the body and collars remains legible, preserving a professional aesthetic throughout the loop's service life. No degradation of the sealing surfaces is introduced by the coating method.

16 mm tube compatibility only

This fitting accepts 16 mm outer-diameter hard tubes and cannot be used with smaller or larger diameters or with soft tubing. Builders planning mixed-size runs must source matching fittings for each tube size separately.

Kohokohdat

  • 90° elbow routes hard tubing cleanly around tight bends
  • Compression design seals 16 mm acrylic, brass, borosilicate or carbon tubes securely
  • Knurled collars allow firm hand-tightening without extra tools
  • Chrome finish resists fading and peeling for long-lasting appearance
  • Alphacool branding on body and collars adds a professional aesthetic

Tekniset tiedot

TypeFittings

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 90° elbow fitting add noticeable flow resistance or heat in a loop running continuously?

The fitting is a passive component with no moving parts and does not generate heat; any flow restriction from the 90° bend is minimal in a properly designed custom loop.

What tube size and material must I already have for this 16 mm compression fitting to work?

You need 16 mm outer-diameter hard tubing made of acrylic, brass, borosilicate glass or carbon; the knurled compression collars seal directly on that tube size.

Will the chrome finish on this 17297 fitting match older Alphacool fittings already in my build?

Alphacool uses a consistent chrome application process across the HT series so the finish should coordinate with existing Alphacool chrome components.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.