Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Chrome straight compression fitting with knurled nut and G1/4 thread

Alphacool

Alphacool Eiszapfen 1/2" ID x 3/4" OD G1/4 Compression Fitting Chrome

SKU CH-8RPS-2K1RE

Connects 13 mm ID and 19 mm OD hard tubing with a G1/4 thread compatible with 95% of components, featuring a durable chrome coating that resists chipping

  • TypeFittings

Color Chrome

  • High-flow design supports efficient coolant circulation
  • Chrome coating bonded to resist chipping and peeling
  • Slanted nut corners press O-ring firmly for secure HardTube seating
  • G1/4 thread fits 95% of water-cooling components
  • Three coloured O-rings included for customisation or UV glow

Chrome Hard-Tube Fitting 13/19 mm

This G1/4 straight compression fitting joins 1/2" ID by 3/4" OD hard tubing in custom liquid-cooling loops. A slanted nut profile presses the included O-ring firmly against the tube for a secure seal that resists vibration during transport. The durable chrome coating is bonded by a special process that prevents chipping or peeling over time. Three coloured O-rings are supplied, with an optional UV-reactive variant available for lighting effects.

Suits single-loop builders wanting premium chrome

This single straight fitting only addresses one connection point; a complete loop requires multiple fittings in various angles. It accepts only 13 mm ID / 19 mm OD rigid tubing, so soft-tube or other diameter systems are not compatible. The G1/4 thread fits standard water-blocks and radiators, but proprietary thread components will not work. Buyers needing angled, rotary or bulkhead configurations must source additional parts separately.

13 mm ID 19 mm OD hard-tube compatibility

The fitting is manufactured exclusively for 1/2" inner diameter and 3/4" outer diameter rigid tubing, identified as the 13/19 mm size. Using any other tube dimensions will prevent a reliable seal and risks leaks. The G1/4 male thread connects to the vast majority of liquid-cooling components that share this standard pitch. Confirm your tubing specifications match these exact figures before purchase.

Kohokohdat

  • High-flow design supports efficient coolant circulation
  • Chrome coating bonded to resist chipping and peeling
  • Slanted nut corners press O-ring firmly for secure HardTube seating
  • G1/4 thread fits 95% of water-cooling components
  • Three coloured O-rings included for customisation or UV glow

Tekniset tiedot

TypeFittings

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What tubing sizes do I need to use this 1/2" ID x 3/4" OD compression fitting?

The fitting accepts tubing with a 13 mm inner diameter and 19 mm outer diameter.

Will this G1/4 fitting thread into my existing water-blocks and radiators?

Yes, the G1/4 thread is compatible with 95% of components using that standard.

How can I confirm the fitting is sealed correctly after installation?

The slanted nut corners press the O-ring firmly against the HardTube; pressurise the loop and check for leaks.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.