NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
ASRock
Intel LGA1200 ATX motherboard with Z590 chipset, four DDR4 slots up to 128GB, 4800MHz OC support, USB-C, HDMI, Gigabit LAN and 7.1 audio
The ASRock Z590-C/ac is an ATX motherboard built on the Intel Z590 chipset with an LGA 1200 socket. It supports 10th and 11th generation Intel Core processors and accommodates up to 128 GB of DDR4 memory across four slots running at speeds up to 4800 MHz when overclocked. The board includes Intel I219V Gigabit LAN and Realtek ALC897 7.1 channel audio with Nahimic enhancement.
This board fits enthusiasts who want a Thunderbolt add-in card header and RAID 0, 1, 5, 10 support over six SATA 6 Gb/s ports. It also provides dual RGB and addressable LED headers plus dedicated CPU and water-pump fan connectors with smart speed control. Builders requiring integrated Wi-Fi or Bluetooth, multiple M.2 slots, or a smaller micro-ATX form factor should look at other models.
The memory subsystem tops out at 128 GB across four DDR4 slots with a maximum overclocked speed of 4800 MHz. This ceiling determines whether the board matches your planned memory kit and performance target. If your workload demands higher memory frequencies or greater total capacity, a different platform will be necessary.
Šai precei pagaidām nav publicētu specifikāciju.
The board uses the ATX form factor with a 24-pin ATX power connector, an 8-pin 12 V connector and an additional 4-pin 12 V connector, all in standard positions for ATX cases.
Both 12 V connectors are Hi-Density power connectors; the 8-pin is required and the 4-pin supplies additional current for heavy CPU loads, so connect both for full stability.
Fit a compatible SPI TPM 2.0 module onto the dedicated header to enable firmware TPM support required by Windows 11.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?