NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
ASRock
Intel LGA1200 ATX motherboard with Z590 chipset, four DDR4 slots up to 128GB, 4800MHz OC support, USB-C, HDMI, Gigabit LAN and 7.1 audio
The ASRock Z590-C/ac is an ATX motherboard built on the Intel Z590 chipset with an LGA 1200 socket. It supports 10th and 11th generation Intel Core processors and accommodates up to 128 GB of DDR4 memory across four slots running at speeds up to 4800 MHz when overclocked. The board includes Intel I219V Gigabit LAN and Realtek ALC897 7.1 channel audio with Nahimic enhancement.
This board fits enthusiasts who want a Thunderbolt add-in card header and RAID 0, 1, 5, 10 support over six SATA 6 Gb/s ports. It also provides dual RGB and addressable LED headers plus dedicated CPU and water-pump fan connectors with smart speed control. Builders requiring integrated Wi-Fi or Bluetooth, multiple M.2 slots, or a smaller micro-ATX form factor should look at other models.
The memory subsystem tops out at 128 GB across four DDR4 slots with a maximum overclocked speed of 4800 MHz. This ceiling determines whether the board matches your planned memory kit and performance target. If your workload demands higher memory frequencies or greater total capacity, a different platform will be necessary.
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
The board uses the ATX form factor with a 24-pin ATX power connector, an 8-pin 12 V connector and an additional 4-pin 12 V connector, all in standard positions for ATX cases.
Both 12 V connectors are Hi-Density power connectors; the 8-pin is required and the 4-pin supplies additional current for heavy CPU loads, so connect both for full stability.
Fit a compatible SPI TPM 2.0 module onto the dedicated header to enable firmware TPM support required by Windows 11.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?