NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
ASUS
Micro-ATX LGA 1700 board with B660 chipset, DDR4 support to 128 GB, PCIe 5.0 x16, two M.2 slots and Wi-Fi
The ASUS TUF GAMING B660M-PLUS WIFI D4 is a MicroATX board built on the Intel B660 chipset for LGA 1700 processors. It supports 12th generation Core, Pentium and Celeron CPUs and runs DDR4 memory up to 128 GB. The board includes one PCI Express 5.0 x16 slot, one additional PCIe x16 slot and one legacy PCI slot.
This board fits builders who want a compact MicroATX layout with integrated Wi-Fi, dual M.2 slots and a single PCIe 5.0 x16 graphics slot. It is not a fit for systems that require more than two M.2 sockets, need additional PCIe x16 lanes or demand a full-size ATX form factor.
The LGA 1700 socket determines which processors can be installed; only 12th generation Intel Core, Pentium and Celeron CPUs are supported. Buyers must verify their exact processor against the manufacturer compatibility list because some units may require a BIOS update before they will post.
| Brand | ASUS |
|---|---|
| Series | TUF |
| Model | TUF GAMING B660M-PLUS WIFI D4 |
| CPU Socket Type | LGA 1700 |
| CPU Type | Core / Pentium / Celeron (12th Gen, LGA1700) |
| Chipset | B660 |
| Memory Standard | DDR4 |
| Maximum Memory Supported | 128GB |
| PCI Express 5.0 x16 | 1 x PCI Express 5.0 x16 |
| PCI Express x16 | 1 |
| PCI Slots | 1 x PCI Slot |
| M.2 | 2 x M.2 |
| RJ45 | 1 x RJ45 |
| DisplayPort | 1 x DisplayPort |
| USB 3.1 | 1 x USB 3.1 |
| Form Factor | Micro ATX |
The board uses the Micro ATX form factor and includes the I/O shield, so it mounts in any case with Micro ATX standoffs.
Install an LGA 1700 CPU, DDR4 memory up to 128 GB, M.2 drives into the two slots, and the Wi‑Fi antenna; the step often missed is attaching the antenna before closing the case.
The CMOS battery will eventually need replacing, and you may add more DDR4 modules or M.2 storage later; the board itself has no user‑serviceable parts.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?