NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
ASUS
Micro-ATX LGA 1700 board with B660 chipset, DDR4 support to 128 GB, PCIe 5.0 x16, two M.2 slots and Wi-Fi
The ASUS TUF GAMING B660M-PLUS WIFI D4 is a MicroATX board built on the Intel B660 chipset for LGA 1700 processors. It supports 12th generation Core, Pentium and Celeron CPUs and runs DDR4 memory up to 128 GB. The board includes one PCI Express 5.0 x16 slot, one additional PCIe x16 slot and one legacy PCI slot.
This board fits builders who want a compact MicroATX layout with integrated Wi-Fi, dual M.2 slots and a single PCIe 5.0 x16 graphics slot. It is not a fit for systems that require more than two M.2 sockets, need additional PCIe x16 lanes or demand a full-size ATX form factor.
The LGA 1700 socket determines which processors can be installed; only 12th generation Intel Core, Pentium and Celeron CPUs are supported. Buyers must verify their exact processor against the manufacturer compatibility list because some units may require a BIOS update before they will post.
| Brand | ASUS |
|---|---|
| Series | TUF |
| Model | TUF GAMING B660M-PLUS WIFI D4 |
| CPU Socket Type | LGA 1700 |
| CPU Type | Core / Pentium / Celeron (12th Gen, LGA1700) |
| Chipset | B660 |
| Memory Standard | DDR4 |
| Maximum Memory Supported | 128GB |
| PCI Express 5.0 x16 | 1 x PCI Express 5.0 x16 |
| PCI Express x16 | 1 |
| PCI Slots | 1 x PCI Slot |
| M.2 | 2 x M.2 |
| RJ45 | 1 x RJ45 |
| DisplayPort | 1 x DisplayPort |
| USB 3.1 | 1 x USB 3.1 |
| Form Factor | Micro ATX |
The board uses the Micro ATX form factor and includes the I/O shield, so it mounts in any case with Micro ATX standoffs.
Install an LGA 1700 CPU, DDR4 memory up to 128 GB, M.2 drives into the two slots, and the Wi‑Fi antenna; the step often missed is attaching the antenna before closing the case.
The CMOS battery will eventually need replacing, and you may add more DDR4 modules or M.2 storage later; the board itself has no user‑serviceable parts.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?