NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.
ASUS
Micro-ATX LGA 1700 board with B660 chipset, DDR4 support to 128 GB, PCIe 5.0 x16, two M.2 slots and Wi-Fi
The ASUS TUF GAMING B660M-PLUS WIFI D4 is a MicroATX board built on the Intel B660 chipset for LGA 1700 processors. It supports 12th generation Core, Pentium and Celeron CPUs and runs DDR4 memory up to 128 GB. The board includes one PCI Express 5.0 x16 slot, one additional PCIe x16 slot and one legacy PCI slot.
This board fits builders who want a compact MicroATX layout with integrated Wi-Fi, dual M.2 slots and a single PCIe 5.0 x16 graphics slot. It is not a fit for systems that require more than two M.2 sockets, need additional PCIe x16 lanes or demand a full-size ATX form factor.
The LGA 1700 socket determines which processors can be installed; only 12th generation Intel Core, Pentium and Celeron CPUs are supported. Buyers must verify their exact processor against the manufacturer compatibility list because some units may require a BIOS update before they will post.
| Brand | ASUS |
|---|---|
| Series | TUF |
| Model | TUF GAMING B660M-PLUS WIFI D4 |
| CPU Socket Type | LGA 1700 |
| CPU Type | Core / Pentium / Celeron (12th Gen, LGA1700) |
| Chipset | B660 |
| Memory Standard | DDR4 |
| Maximum Memory Supported | 128GB |
| PCI Express 5.0 x16 | 1 x PCI Express 5.0 x16 |
| PCI Express x16 | 1 |
| PCI Slots | 1 x PCI Slot |
| M.2 | 2 x M.2 |
| RJ45 | 1 x RJ45 |
| DisplayPort | 1 x DisplayPort |
| USB 3.1 | 1 x USB 3.1 |
| Form Factor | Micro ATX |
The board uses the Micro ATX form factor and includes the I/O shield, so it mounts in any case with Micro ATX standoffs.
Install an LGA 1700 CPU, DDR4 memory up to 128 GB, M.2 drives into the two slots, and the Wi‑Fi antenna; the step often missed is attaching the antenna before closing the case.
The CMOS battery will eventually need replacing, and you may add more DDR4 modules or M.2 storage later; the board itself has no user‑serviceable parts.
Også i denne avdelingen
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
Det du betaler med, og det du ser prisene i.
Sendes fra lommeboken din i kassen
Kun visning — katalogen er prissatt i USD
Fant ingen valuta.
Velg språket nettstedet snakker til deg på.
Ny her?
Har du allerede en konto?
Det finnes ingen automatisk tilbakestilling: butikken sender ikke e-post, så det finnes ingen engangslenke å be om. La adressen stå på kontoen, så blir den behandlet manuelt.
Forespørsel registrert
Ingenting er på vei til innboksen din — butikken sender ingen e-post i det hele tatt. Noen behandler dette manuelt.
Husket du det likevel?