Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver metal 1U server power supply with dual 40mm fans and 20+4 pin connector

Athena Power

Athena Power AP-U1ATX30A 300W 1U server power supply

SKU CH-X2PQ-XSF8D MPN AP-U1ATX30A

A 300W single 1U server power supply with dual fans, active PFC and a 20+4 pin main connector for compact rackmount chassis

  • Single/RedundantSingle
  • Maximum Power300W
  • Main Connector20+4Pin
  • Output Current+3.3@10A, +5V@10A, +12V@6A (Min) 15A (Max), -12V@-0A (Min) 0
  • Input Voltage88 - 264 V
  • Input Frequency Range47 - 63 Hz
  • 300W output powers dense 1U server builds
  • Active PFC meets EN61000-3-2 for clean mains draw
  • Dual 40mm ball-bearing fans with thermal speed control
  • 100000-hour MTBF at full load and 25°C
  • 20+4 pin main connector plus two SATA power plugs

Compact 1U server power supply

The Athena Power AP-U1ATX30A is a 300W single-unit PSU built for 1U rackmount chassis. It fits space-constrained industrial servers that need standard ATX power delivery in a shallow 1.55-inch height. The unit includes a 20+4-pin main connector, one 4-pin CPU connector, three Molex, two SATA and one floppy connector. It is not suited for builds that require PCIe power cables or redundant hot-swap capability.

Dual 40mm fans with auto speed control

Two ball-bearing fans spin under a smart thermal controller that adjusts speed to load and temperature. At full 300W output and 25°C ambient the design targets 100,000 hours MTBF. Input accepts 88–264 V at 47–63 Hz with active PFC meeting EN61000-3-2. Hold-up time is at least 17 ms at nominal voltage. Protections cover over-voltage, short-circuit and overload conditions.

Replaces older 1U units lacking active PFC

The jump is worthwhile when a legacy supply cannot deliver stable +12V current up to 15A or lacks SATA power for current drives. It also upgrades systems that need the 20+4-pin ATX v2.2 header instead of a 20-pin-only design. Builds requiring 6-pin, 8-pin or 6+2-pin PCIe cables must look elsewhere.

Priekšrocības

  • 300W output powers dense 1U server builds
  • Active PFC meets EN61000-3-2 for clean mains draw
  • Dual 40mm ball-bearing fans with thermal speed control
  • 100000-hour MTBF at full load and 25°C
  • 20+4 pin main connector plus two SATA power plugs

Specifikācijas

BrandAthena Power
ModelAP-U1ATX30A
Single/RedundantSingle
Maximum Power300W
Main Connector20+4Pin
Output Current+3.3@10A, +5V@10A, +12V@6A (Min) 15A (Max), -12V@-0A (Min) 0.3A (Max), [email protected]
Input Voltage88 - 264 V
Input Frequency Range47 - 63 Hz
Fans2
MTBF100,000 Hours on Full Load at +25 degree C
Hold-up Time17ms Minimum at Nominal Input Voltage
ProtectionOver voltage, short circuit and overload protection.
FeaturesActive PFC (Power Factor Correction) meets EN61000-3-2
Smart Auto Fan Speed Controller
100% Hi-pot, ATE and Burn-in Tested
Output Over Voltage, Short Circuit and Overload Protection.
Low Noise and Ripple
Connectors: ATX 24 (20+4) Pin x 1, P4-12V 4 Pin x 1, SATA 15 Pin x 2, Molex 4 Pin x 2, Floppy 4 Pin x 1
Dimensions1.55" x 3.94" x 7.87"
Weight3.00 lbs.
Humidity5~90% on Operating; 5~95% on Storage
Temperature0 degree C - +50 degree C on Full Load
Package Contents1 x AP-U1ATX30A
1 x Power Cord
Sūtījuma svars1.14 kg
Sūtījuma izmēri284 × 152 × 53 mm

Jautājumi par šo preci

How do I install this 1U server power supply and which step is often missed?

Slide the unit into the 1U chassis bay, secure it with the mounting screws, connect the 20+4Pin main connector, the 4-pin CPU connector, two SATA connectors and three Molex connectors, then plug the IEC power cord; the step often missed is attaching the 4-pin CPU power cable.

What maintenance or replacement will this unit need later?

The dual 40mm ball-bearing fans are the only moving parts; after long-term operation they may require cleaning or replacement, while the electrolytic capacitors inside will eventually age and the whole unit should be replaced once it reaches the 100,000-hour MTBF rating.

What limit appears first when this supply runs at full 300W load continuously?

The +12V rail is rated for a maximum of 15A, so sustained loads drawing more than 15A on the 12V line will trigger overload protection before the overall 300W or thermal limits are reached.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.