Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular silver metal mining unit with front grille and rear power supply visible

bitmain

bitmain Antminer S19 95TH/s 3250W CA mining hardware

SKU CH-NEE5-QH9DP

Bitcoin ASIC miner delivering 95 TH/s at 3250 W with included PSU, requires 220 V input

  • High hashrate for Bitcoin mining at 95 TH/s
  • Efficient power draw of 3250 W for lower operating cost
  • 220 V input requirement ensures stable operation
  • Includes PSU so no separate supply purchase needed
  • Ready-to-mine ASIC saves setup time and effort

Purpose-built Bitcoin miner

This Bitmain Antminer S19 is an ASIC machine designed for Bitcoin mining and ships with a power supply included. It delivers a hash rate of 95 TH/s while drawing 3250 W from a 220 V circuit. The unit is sold new and intended for operators who can provide the required voltage and cooling.

Suitable for high-power sites.

The hardware suits facilities that can supply 220 V and handle a continuous 3250 W load with adequate heat removal. Buyers limited to 110 V circuits or without dedicated cooling infrastructure should look at other options. A 40 % restock fee applies within 30 days, so the purchase demands serious commitment.

Input voltage requirement

The single specification that decides fit is the mandatory 220 V input; incorrect voltage will likely damage the miner. Confirm your site delivers this voltage before ordering.

Priekšrocības

  • High hashrate for Bitcoin mining at 95 TH/s
  • Efficient power draw of 3250 W for lower operating cost
  • 220 V input requirement ensures stable operation
  • Includes PSU so no separate supply purchase needed
  • Ready-to-mine ASIC saves setup time and effort

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

Which version of the Antminer S19 should I choose if I see both 95TH/s and 110TH/s models?

This unit is the 95TH/s model with a 3250 W power draw and a required 220 V supply; the higher 110TH/s version is a different model with its own specifications.

What does the 95TH/s rating mean for daily operation?

The miner runs at 95 trillion hashes per second while drawing 3250 W continuously, so you need a 220 V circuit that can sustain that load and sufficient cooling to handle the heat output.

What power interface does the S19 use and what does it limit?

It requires a 220 V input; using a lower voltage can damage the hardware, and the 3250 W draw sets the minimum circuit capacity you must provide.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.