Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular silver metal mining unit with front grille and rear power supply visible

bitmain

bitmain Antminer S19 95TH/s 3250W CA mining hardware

SKU CH-NEE5-QH9DP

Bitcoin ASIC miner delivering 95 TH/s at 3250 W with included PSU, requires 220 V input

  • High hashrate for Bitcoin mining at 95 TH/s
  • Efficient power draw of 3250 W for lower operating cost
  • 220 V input requirement ensures stable operation
  • Includes PSU so no separate supply purchase needed
  • Ready-to-mine ASIC saves setup time and effort

Purpose-built Bitcoin miner

This Bitmain Antminer S19 is an ASIC machine designed for Bitcoin mining and ships with a power supply included. It delivers a hash rate of 95 TH/s while drawing 3250 W from a 220 V circuit. The unit is sold new and intended for operators who can provide the required voltage and cooling.

Suitable for high-power sites.

The hardware suits facilities that can supply 220 V and handle a continuous 3250 W load with adequate heat removal. Buyers limited to 110 V circuits or without dedicated cooling infrastructure should look at other options. A 40 % restock fee applies within 30 days, so the purchase demands serious commitment.

Input voltage requirement

The single specification that decides fit is the mandatory 220 V input; incorrect voltage will likely damage the miner. Confirm your site delivers this voltage before ordering.

Puncte forte

  • High hashrate for Bitcoin mining at 95 TH/s
  • Efficient power draw of 3250 W for lower operating cost
  • 220 V input requirement ensures stable operation
  • Includes PSU so no separate supply purchase needed
  • Ready-to-mine ASIC saves setup time and effort

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

Which version of the Antminer S19 should I choose if I see both 95TH/s and 110TH/s models?

This unit is the 95TH/s model with a 3250 W power draw and a required 220 V supply; the higher 110TH/s version is a different model with its own specifications.

What does the 95TH/s rating mean for daily operation?

The miner runs at 95 trillion hashes per second while drawing 3250 W continuously, so you need a 220 V circuit that can sustain that load and sufficient cooling to handle the heat output.

What power interface does the S19 use and what does it limit?

It requires a 220 V input; using a lower voltage can damage the hardware, and the 3250 W draw sets the minimum circuit capacity you must provide.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.