Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular silver metal mining unit with front grille and rear power supply visible

bitmain

bitmain Antminer S19 95TH/s 3250W CA mining hardware

SKU CH-NEE5-QH9DP

Bitcoin ASIC miner delivering 95 TH/s at 3250 W with included PSU, requires 220 V input

  • High hashrate for Bitcoin mining at 95 TH/s
  • Efficient power draw of 3250 W for lower operating cost
  • 220 V input requirement ensures stable operation
  • Includes PSU so no separate supply purchase needed
  • Ready-to-mine ASIC saves setup time and effort

Purpose-built Bitcoin miner

This Bitmain Antminer S19 is an ASIC machine designed for Bitcoin mining and ships with a power supply included. It delivers a hash rate of 95 TH/s while drawing 3250 W from a 220 V circuit. The unit is sold new and intended for operators who can provide the required voltage and cooling.

Suitable for high-power sites.

The hardware suits facilities that can supply 220 V and handle a continuous 3250 W load with adequate heat removal. Buyers limited to 110 V circuits or without dedicated cooling infrastructure should look at other options. A 40 % restock fee applies within 30 days, so the purchase demands serious commitment.

Input voltage requirement

The single specification that decides fit is the mandatory 220 V input; incorrect voltage will likely damage the miner. Confirm your site delivers this voltage before ordering.

Pluspunten

  • High hashrate for Bitcoin mining at 95 TH/s
  • Efficient power draw of 3250 W for lower operating cost
  • 220 V input requirement ensures stable operation
  • Includes PSU so no separate supply purchase needed
  • Ready-to-mine ASIC saves setup time and effort

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

Which version of the Antminer S19 should I choose if I see both 95TH/s and 110TH/s models?

This unit is the 95TH/s model with a 3250 W power draw and a required 220 V supply; the higher 110TH/s version is a different model with its own specifications.

What does the 95TH/s rating mean for daily operation?

The miner runs at 95 trillion hashes per second while drawing 3250 W continuously, so you need a 220 V circuit that can sustain that load and sufficient cooling to handle the heat output.

What power interface does the S19 use and what does it limit?

It requires a 220 V input; using a lower voltage can damage the hardware, and the 3250 W draw sets the minimum circuit capacity you must provide.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.