Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 92mm square case fan with black rotor and black frame, no LED lighting

Blacknoise

Blacknoise BlackSilentPro PE-P 92mm 1800rpm PWM case fan

SKU CH-YSMA-B6QZK

A 92 mm PWM case fan delivering 38.26 ft³/m airflow at 1800 RPM with a 20 dBA noise level

  • TypeCase Fan
  • Fan Size92mm
  • Bearing TypeNANO-SLI
  • RPM1800 RPM
  • Air Flow38.26
  • Noise Level20 dBA
  • Quiet 20 dBA operation for low-noise builds
  • 1800 RPM PWM speed for adjustable cooling
  • 26 ft³/m airflow moves heat efficiently
  • 92 mm frame fits compact chassis
  • NANO-SLI bearing reduces friction and wear

92mm PWM case fan for quiet builds

The Blacknoise BlackSilentPro PE-P is a 92mm case fan designed for systems that prioritise low noise. It targets builders who want a compact axial fan with PWM control and a 20 dBA acoustic rating. The 1800 RPM maximum speed delivers 38.26 ft³/m of airflow while keeping sound output minimal. Users needing larger diameters or higher static pressure for dense radiators should look elsewhere.

38.26 ft³/m airflow at 1800 RPM

At full speed the fan moves 38.26 ft³/m of air, which is sufficient for moderate component cooling or general chassis ventilation. The 20 dBA noise level remains low even under load, leaving headroom for quiet operation. Demands such as high-restriction water-cooling radiators or heavily overclocked hardware will exceed what this airflow figure can sustain. The 4-pin PWM connector allows the motherboard to scale speed down when thermal load is light.

NANO-SLI bearing with textile-sheathed cables

A NANO-SLI magnetic bearing and NB-EKA-P2 drive provide low start-up voltage and long-term reliability. The frame measures 92mm by 92mm by 25mm and is made from reinforced fibreglass PBT with a Bayer Makrolon rotor that resists dust buildup. Included are 20 cm and 50 cm cables wrapped in textile sheathing, plus a screw set and a silicone sealing frame for vibration-free mounting. No LED lighting is present, keeping the appearance understated.

Priekšrocības

  • Quiet 20 dBA operation for low-noise builds
  • 1800 RPM PWM speed for adjustable cooling
  • 26 ft³/m airflow moves heat efficiently
  • 92 mm frame fits compact chassis
  • NANO-SLI bearing reduces friction and wear

Specifikācijas

SeriesBlackSilentPro
TypeCase Fan
Fan Size92mm
Bearing TypeNANO-SLI
RPM1800 RPM
Air Flow38.26
Noise Level20 dBA
Power Connector4 Pin
ColorBlack
LEDNo

Jautājumi par šo preci

Will the 92 mm frame and 4-pin PWM connector fit the same mounting holes and header I use for my current 92 mm fans?

Yes — the fan is 92 mm square by 25 mm thick and uses a standard 4-pin PWM connector, so it matches existing 92 mm mounting points and motherboard headers.

How can I confirm the fan is running at its rated 1800 RPM and 20 dBA after installation?

Monitor the RPM reading in BIOS or fan-control software; it should report 1800 RPM at full PWM duty, and the acoustic output should be close to the specified 20 dBA.

Which cables and mounting hardware are included, and do I need to buy anything else?

The box contains the fan, a 20 cm and a 50 cm textile-sheathed PWM cable, a screw set and a silicone sealing frame — no extra parts are required for installation.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.