Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava

Blacknoise

Blacknoise BlackSilentPro PE-P 92mm 1800rpm PWM case fan

SKU CH-YSMA-B6QZK

A 92 mm PWM case fan delivering 38.26 ft³/m airflow at 1800 RPM with a 20 dBA noise level

  • TypeCase Fan
  • Fan Size92mm
  • Bearing TypeNANO-SLI
  • RPM1800 RPM
  • Air Flow38.26
  • Noise Level20 dBA
  • Quiet 20 dBA operation for low-noise builds
  • 1800 RPM PWM speed for adjustable cooling
  • 26 ft³/m airflow moves heat efficiently
  • 92 mm frame fits compact chassis
  • NANO-SLI bearing reduces friction and wear

92mm PWM case fan for quiet builds

The Blacknoise BlackSilentPro PE-P is a 92mm case fan designed for systems that prioritise low noise. It targets builders who want a compact axial fan with PWM control and a 20 dBA acoustic rating. The 1800 RPM maximum speed delivers 38.26 ft³/m of airflow while keeping sound output minimal. Users needing larger diameters or higher static pressure for dense radiators should look elsewhere.

38.26 ft³/m airflow at 1800 RPM

At full speed the fan moves 38.26 ft³/m of air, which is sufficient for moderate component cooling or general chassis ventilation. The 20 dBA noise level remains low even under load, leaving headroom for quiet operation. Demands such as high-restriction water-cooling radiators or heavily overclocked hardware will exceed what this airflow figure can sustain. The 4-pin PWM connector allows the motherboard to scale speed down when thermal load is light.

NANO-SLI bearing with textile-sheathed cables

A NANO-SLI magnetic bearing and NB-EKA-P2 drive provide low start-up voltage and long-term reliability. The frame measures 92mm by 92mm by 25mm and is made from reinforced fibreglass PBT with a Bayer Makrolon rotor that resists dust buildup. Included are 20 cm and 50 cm cables wrapped in textile sheathing, plus a screw set and a silicone sealing frame for vibration-free mounting. No LED lighting is present, keeping the appearance understated.

Istaknuto

  • Quiet 20 dBA operation for low-noise builds
  • 1800 RPM PWM speed for adjustable cooling
  • 26 ft³/m airflow moves heat efficiently
  • 92 mm frame fits compact chassis
  • NANO-SLI bearing reduces friction and wear

Specifikacije

SeriesBlackSilentPro
TypeCase Fan
Fan Size92mm
Bearing TypeNANO-SLI
RPM1800 RPM
Air Flow38.26
Noise Level20 dBA
Power Connector4 Pin
ColorBlack
LEDNo

Pitanja o ovom artiklu

Will the 92 mm frame and 4-pin PWM connector fit the same mounting holes and header I use for my current 92 mm fans?

Yes — the fan is 92 mm square by 25 mm thick and uses a standard 4-pin PWM connector, so it matches existing 92 mm mounting points and motherboard headers.

How can I confirm the fan is running at its rated 1800 RPM and 20 dBA after installation?

Monitor the RPM reading in BIOS or fan-control software; it should report 1800 RPM at full PWM duty, and the acoustic output should be close to the specified 20 dBA.

Which cables and mounting hardware are included, and do I need to buy anything else?

The box contains the fan, a 20 cm and a 50 cm textile-sheathed PWM cable, a screw set and a silicone sealing frame — no extra parts are required for installation.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.