Tripp Lite
Tripp Lite PDUMNH15 Monitored 1U PDU 120V 15A 8x 5-15R
- Monitored
- 1U
328,99 USD
0.00422877BTC
På lager
Blacknoise
Blacknoise BlackSilentPro PE-P 92mm 1800rpm PWM case fan
A 92 mm PWM case fan delivering 38.26 ft³/m airflow at 1800 RPM with a 20 dBA noise level
- TypeCase Fan
- Fan Size92mm
- Bearing TypeNANO-SLI
- RPM1800 RPM
- Air Flow38.26
- Noise Level20 dBA
- Quiet 20 dBA operation for low-noise builds
- 1800 RPM PWM speed for adjustable cooling
- 26 ft³/m airflow moves heat efficiently
- 92 mm frame fits compact chassis
- NANO-SLI bearing reduces friction and wear
92mm PWM case fan for quiet builds
The Blacknoise BlackSilentPro PE-P is a 92mm case fan designed for systems that prioritise low noise. It targets builders who want a compact axial fan with PWM control and a 20 dBA acoustic rating. The 1800 RPM maximum speed delivers 38.26 ft³/m of airflow while keeping sound output minimal. Users needing larger diameters or higher static pressure for dense radiators should look elsewhere.
38.26 ft³/m airflow at 1800 RPM
At full speed the fan moves 38.26 ft³/m of air, which is sufficient for moderate component cooling or general chassis ventilation. The 20 dBA noise level remains low even under load, leaving headroom for quiet operation. Demands such as high-restriction water-cooling radiators or heavily overclocked hardware will exceed what this airflow figure can sustain. The 4-pin PWM connector allows the motherboard to scale speed down when thermal load is light.
NANO-SLI bearing with textile-sheathed cables
A NANO-SLI magnetic bearing and NB-EKA-P2 drive provide low start-up voltage and long-term reliability. The frame measures 92mm by 92mm by 25mm and is made from reinforced fibreglass PBT with a Bayer Makrolon rotor that resists dust buildup. Included are 20 cm and 50 cm cables wrapped in textile sheathing, plus a screw set and a silicone sealing frame for vibration-free mounting. No LED lighting is present, keeping the appearance understated.
Høydepunkter
- Quiet 20 dBA operation for low-noise builds
- 1800 RPM PWM speed for adjustable cooling
- 26 ft³/m airflow moves heat efficiently
- 92 mm frame fits compact chassis
- NANO-SLI bearing reduces friction and wear
Spesifikasjoner
| Series | BlackSilentPro |
|---|---|
| Type | Case Fan |
| Fan Size | 92mm |
| Bearing Type | NANO-SLI |
| RPM | 1800 RPM |
| Air Flow | 38.26 |
| Noise Level | 20 dBA |
| Power Connector | 4 Pin |
| Color | Black |
| LED | No |
Spørsmål om denne varen
Will the 92 mm frame and 4-pin PWM connector fit the same mounting holes and header I use for my current 92 mm fans?
Yes — the fan is 92 mm square by 25 mm thick and uses a standard 4-pin PWM connector, so it matches existing 92 mm mounting points and motherboard headers.
How can I confirm the fan is running at its rated 1800 RPM and 20 dBA after installation?
Monitor the RPM reading in BIOS or fan-control software; it should report 1800 RPM at full PWM duty, and the acoustic output should be close to the specified 20 dBA.
Which cables and mounting hardware are included, and do I need to buy anything else?
The box contains the fan, a 20 cm and a 50 cm textile-sheathed PWM cable, a screw set and a silicone sealing frame — no extra parts are required for installation.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
