NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Brute Networks
16GB DDR4-2400 ECC registered RDIMM with CL15 latency and 1.2V operation
This 16GB DDR4-2400 ECC Registered RDIMM operates at PC4-19200 speed with CL15 latency and 1.20V voltage. It uses a 2Rx4 organisation and major brand chipsets from Samsung, SK Hynix or Micron. The module is 100% HP compatible and meets or exceeds OEM specifications for the 851005-B21 part number. It carries a lifetime warranty from Brute Networks.
This module suits administrators expanding memory in compatible HP servers that require DDR4-2400 registered ECC RDIMMs. It is not for systems that accept only unbuffered UDIMMs or load-reduced LRDIMMs. Buyers needing capacities other than 16GB or speeds other than 2400MHz should look at different modules. Desktop or laptop builders cannot use this registered form factor.
The single specification that determines fit is the registered ECC RDIMM form factor combined with DDR4-2400 speed. Only motherboards with chipsets supporting registered error-correcting modules at this data rate will accept it. Verify the server memory qualification list for the 851005-B21 part number before purchase. No other memory type will work in slots requiring this exact registered ECC configuration.
| Brand | HP |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major Brand Chipset |
The module operates at 1.20V, which is the standard low voltage for DDR4, so it contributes minimal heat even in a fully populated chassis running continuously.
The motherboard needs DDR4 RDIMM slots that support registered ECC memory and a memory controller able to address 2Rx4 organisation at 2400 MHz.
Yes, it will run at the lowest common speed and voltage; all modules must be registered ECC RDIMMs, and the system will default to the slowest JEDEC timing present.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?