NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Brute Networks
16GB DDR4-2400 ECC registered RDIMM with CL15 latency and 1.2V operation
This 16GB DDR4-2400 ECC Registered RDIMM operates at PC4-19200 speed with CL15 latency and 1.20V voltage. It uses a 2Rx4 organisation and major brand chipsets from Samsung, SK Hynix or Micron. The module is 100% HP compatible and meets or exceeds OEM specifications for the 851005-B21 part number. It carries a lifetime warranty from Brute Networks.
This module suits administrators expanding memory in compatible HP servers that require DDR4-2400 registered ECC RDIMMs. It is not for systems that accept only unbuffered UDIMMs or load-reduced LRDIMMs. Buyers needing capacities other than 16GB or speeds other than 2400MHz should look at different modules. Desktop or laptop builders cannot use this registered form factor.
The single specification that determines fit is the registered ECC RDIMM form factor combined with DDR4-2400 speed. Only motherboards with chipsets supporting registered error-correcting modules at this data rate will accept it. Verify the server memory qualification list for the 851005-B21 part number before purchase. No other memory type will work in slots requiring this exact registered ECC configuration.
| Brand | HP |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major Brand Chipset |
The module operates at 1.20V, which is the standard low voltage for DDR4, so it contributes minimal heat even in a fully populated chassis running continuously.
The motherboard needs DDR4 RDIMM slots that support registered ECC memory and a memory controller able to address 2Rx4 organisation at 2400 MHz.
Yes, it will run at the lowest common speed and voltage; all modules must be registered ECC RDIMMs, and the system will default to the slowest JEDEC timing present.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?