NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Brute Networks
16GB DDR4-2400 ECC registered RDIMM with CL15 latency and 1.2V operation
This 16GB DDR4-2400 ECC Registered RDIMM operates at PC4-19200 speed with CL15 latency and 1.20V voltage. It uses a 2Rx4 organisation and major brand chipsets from Samsung, SK Hynix or Micron. The module is 100% HP compatible and meets or exceeds OEM specifications for the 851005-B21 part number. It carries a lifetime warranty from Brute Networks.
This module suits administrators expanding memory in compatible HP servers that require DDR4-2400 registered ECC RDIMMs. It is not for systems that accept only unbuffered UDIMMs or load-reduced LRDIMMs. Buyers needing capacities other than 16GB or speeds other than 2400MHz should look at different modules. Desktop or laptop builders cannot use this registered form factor.
The single specification that determines fit is the registered ECC RDIMM form factor combined with DDR4-2400 speed. Only motherboards with chipsets supporting registered error-correcting modules at this data rate will accept it. Verify the server memory qualification list for the 851005-B21 part number before purchase. No other memory type will work in slots requiring this exact registered ECC configuration.
| Brand | HP |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major Brand Chipset |
The module operates at 1.20V, which is the standard low voltage for DDR4, so it contributes minimal heat even in a fully populated chassis running continuously.
The motherboard needs DDR4 RDIMM slots that support registered ECC memory and a memory controller able to address 2Rx4 organisation at 2400 MHz.
Yes, it will run at the lowest common speed and voltage; all modules must be registered ECC RDIMMs, and the system will default to the slowest JEDEC timing present.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?