Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two black low-profile DDR4 DIMMs with aluminium heatspreaders

Corsair

Corsair Vengeance LPX 32GB (2 x 16GB) DDR4-2666 CL16 desktop RAM

SKU CH-ZJR3-AMNWX

32 GB dual-channel DDR4 kit running at 2666 MHz CL16 with aluminum heatspreaders and XMP 2.0 support

  • 32 GB kit for high-capacity multitasking
  • 2666 MHz DDR4 speed for responsive performance
  • CL16 latency for quick data access
  • Aluminium heatspreader for cooler operation
  • XMP 2.0 support for automatic overclocking

High-Performance DDR4 Kit for Intel X99

This 32GB kit contains two 16GB unbuffered DIMMs rated at DDR4-2666 with CL16 timings at 1.20V. It is designed for high-performance overclocking on Intel X99 and 100 Series motherboards. Each IC is individually screened for performance potential.

Aluminium Heatspreader and Eight-Layer PCB

The heatspreader uses pure aluminium for faster heat dissipation during sustained loads. An eight-layer PCB helps manage heat and provides superior overclocking headroom. Modules are compatibility-tested across X99 and 100 Series platforms for reliably fast performance.

XMP 2.0 Automatic Overclocking Support

XMP 2.0 support enables trouble-free automatic overclocking without manual BIOS tuning. The kit is available in multiple colours to match your motherboard or component theme. The DDR4 form factor offers higher frequencies, greater bandwidth and lower power consumption than DDR3 modules.

Priekšrocības

  • 32 GB kit for high-capacity multitasking
  • 2666 MHz DDR4 speed for responsive performance
  • CL16 latency for quick data access
  • Aluminium heatspreader for cooler operation
  • XMP 2.0 support for automatic overclocking

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How do I install the 288-pin DIMM modules and what step do people often miss?

Align the notch on each 288-pin DIMM with the slot key, press down firmly until the retention clips click, then enable the XMP 2.0 profile in BIOS so the kit runs at 2666 MHz instead of the default JEDEC speed.

What maintenance or replacement will the aluminum heatspreader and eight-layer PCB need later?

The pure aluminum heatspreader and eight-layer PCB require no scheduled maintenance; if a module ever fails, replace the individual 16 GB DIMM rather than the full 32 GB kit.

What limit appears first during sustained use at 1.20 V and CL16?

The CL16 latency at 2666 MHz is the first bottleneck under sustained load; the aluminum heatspreader and eight-layer PCB keep thermals in check so voltage and temperature do not throttle the kit.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.