Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two black low-profile DDR4 DIMMs with aluminium heatspreaders

Corsair

Corsair Vengeance LPX 32GB (2 x 16GB) DDR4-2666 CL16 desktop RAM

SKU CH-ZJR3-AMNWX

32 GB dual-channel DDR4 kit running at 2666 MHz CL16 with aluminum heatspreaders and XMP 2.0 support

  • 32 GB kit for high-capacity multitasking
  • 2666 MHz DDR4 speed for responsive performance
  • CL16 latency for quick data access
  • Aluminium heatspreader for cooler operation
  • XMP 2.0 support for automatic overclocking

High-Performance DDR4 Kit for Intel X99

This 32GB kit contains two 16GB unbuffered DIMMs rated at DDR4-2666 with CL16 timings at 1.20V. It is designed for high-performance overclocking on Intel X99 and 100 Series motherboards. Each IC is individually screened for performance potential.

Aluminium Heatspreader and Eight-Layer PCB

The heatspreader uses pure aluminium for faster heat dissipation during sustained loads. An eight-layer PCB helps manage heat and provides superior overclocking headroom. Modules are compatibility-tested across X99 and 100 Series platforms for reliably fast performance.

XMP 2.0 Automatic Overclocking Support

XMP 2.0 support enables trouble-free automatic overclocking without manual BIOS tuning. The kit is available in multiple colours to match your motherboard or component theme. The DDR4 form factor offers higher frequencies, greater bandwidth and lower power consumption than DDR3 modules.

Prednosti

  • 32 GB kit for high-capacity multitasking
  • 2666 MHz DDR4 speed for responsive performance
  • CL16 latency for quick data access
  • Aluminium heatspreader for cooler operation
  • XMP 2.0 support for automatic overclocking

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How do I install the 288-pin DIMM modules and what step do people often miss?

Align the notch on each 288-pin DIMM with the slot key, press down firmly until the retention clips click, then enable the XMP 2.0 profile in BIOS so the kit runs at 2666 MHz instead of the default JEDEC speed.

What maintenance or replacement will the aluminum heatspreader and eight-layer PCB need later?

The pure aluminum heatspreader and eight-layer PCB require no scheduled maintenance; if a module ever fails, replace the individual 16 GB DIMM rather than the full 32 GB kit.

What limit appears first during sustained use at 1.20 V and CL16?

The CL16 latency at 2666 MHz is the first bottleneck under sustained load; the aluminum heatspreader and eight-layer PCB keep thermals in check so voltage and temperature do not throttle the kit.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.