暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two black low-profile DDR4 DIMMs with aluminium heatspreaders

Corsair

Corsair Vengeance LPX 32GB (2 x 16GB) DDR4-2666 CL16 desktop RAM

SKU CH-ZJR3-AMNWX

32 GB dual-channel DDR4 kit running at 2666 MHz CL16 with aluminum heatspreaders and XMP 2.0 support

  • 32 GB kit for high-capacity multitasking
  • 2666 MHz DDR4 speed for responsive performance
  • CL16 latency for quick data access
  • Aluminium heatspreader for cooler operation
  • XMP 2.0 support for automatic overclocking

High-Performance DDR4 Kit for Intel X99

This 32GB kit contains two 16GB unbuffered DIMMs rated at DDR4-2666 with CL16 timings at 1.20V. It is designed for high-performance overclocking on Intel X99 and 100 Series motherboards. Each IC is individually screened for performance potential.

Aluminium Heatspreader and Eight-Layer PCB

The heatspreader uses pure aluminium for faster heat dissipation during sustained loads. An eight-layer PCB helps manage heat and provides superior overclocking headroom. Modules are compatibility-tested across X99 and 100 Series platforms for reliably fast performance.

XMP 2.0 Automatic Overclocking Support

XMP 2.0 support enables trouble-free automatic overclocking without manual BIOS tuning. The kit is available in multiple colours to match your motherboard or component theme. The DDR4 form factor offers higher frequencies, greater bandwidth and lower power consumption than DDR3 modules.

特長

  • 32 GB kit for high-capacity multitasking
  • 2666 MHz DDR4 speed for responsive performance
  • CL16 latency for quick data access
  • Aluminium heatspreader for cooler operation
  • XMP 2.0 support for automatic overclocking

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How do I install the 288-pin DIMM modules and what step do people often miss?

Align the notch on each 288-pin DIMM with the slot key, press down firmly until the retention clips click, then enable the XMP 2.0 profile in BIOS so the kit runs at 2666 MHz instead of the default JEDEC speed.

What maintenance or replacement will the aluminum heatspreader and eight-layer PCB need later?

The pure aluminum heatspreader and eight-layer PCB require no scheduled maintenance; if a module ever fails, replace the individual 16 GB DIMM rather than the full 32 GB kit.

What limit appears first during sustained use at 1.20 V and CL16?

The CL16 latency at 2666 MHz is the first bottleneck under sustained load; the aluminum heatspreader and eight-layer PCB keep thermals in check so voltage and temperature do not throttle the kit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。