BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Crucial
16 GB dual-channel DDR3 kit at 1600 MHz with CL11 latency for 2012 MacBook Pro
This 16 GB kit contains two 8 GB DDR3 SO-DIMM modules rated at 1600 MHz with CAS latency 11. It is built for the Apple MacBook Pro (Mid 2012) and runs at 1.35 V or 1.5 V without ECC or buffering. The unbuffered design suits standard notebook slots.
The DDR3 1600 (PC3 12800) standard tops out at 1600 MT/s and 1.35 V for DDR3L operation. Systems that only accept 1.5 V DDR3 will still run these modules at the higher voltage. Maximum density per slot is 8 GB in 204-pin form factor.
Installation requires opening the MacBook Pro bottom case, removing existing modules and seating the new SO-DIMMs until the retention clips click. Common issues are inserting modules at an angle or not pressing firmly enough to engage both clips. No heat spreader means tight clearances are not a problem.
| Brand | Crucial |
|---|---|
| Model | CT2K8G3S160BM |
| Type | 204-Pin DDR3 SO-DIMM |
| Compatibility | For Apple iMac |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | 11 |
| Voltage | 1.35V/1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Specifications | 1024Meg x 64 Lead free Halogen free |
| Features | Increases Mac system performance Compatible with Mac systems All DDR3 and DDR3L modules are lead- and halogen-free Easy to install Every single module extensively tested at the component and module level Available in SODIMMs, RDIMMs, and ECC UDIMMs |
| Sūtījuma svars | 0.06 kg |
| Sūtījuma izmēri | 173 × 123 × 13 mm |
The kit provides 16 GB as two 8 GB modules, matching the maximum supported by the compatible MacBook Pro (Mid 2012) and iMac models.
The modules run at DDR3 1600 (PC3 12800) with CAS latency 11, delivering the rated bandwidth the Mac memory controller expects.
Yes, the 204-pin DDR3 SO-DIMM form factor matches the memory slots in the listed MacBook Pro (Mid 2012) and compatible iMac systems.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?