BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Crucial
16 GB dual-channel DDR3 kit at 1600 MHz with CL11 latency for 2012 MacBook Pro
This 16 GB kit contains two 8 GB DDR3 SO-DIMM modules rated at 1600 MHz with CAS latency 11. It is built for the Apple MacBook Pro (Mid 2012) and runs at 1.35 V or 1.5 V without ECC or buffering. The unbuffered design suits standard notebook slots.
The DDR3 1600 (PC3 12800) standard tops out at 1600 MT/s and 1.35 V for DDR3L operation. Systems that only accept 1.5 V DDR3 will still run these modules at the higher voltage. Maximum density per slot is 8 GB in 204-pin form factor.
Installation requires opening the MacBook Pro bottom case, removing existing modules and seating the new SO-DIMMs until the retention clips click. Common issues are inserting modules at an angle or not pressing firmly enough to engage both clips. No heat spreader means tight clearances are not a problem.
| Brand | Crucial |
|---|---|
| Model | CT2K8G3S160BM |
| Type | 204-Pin DDR3 SO-DIMM |
| Compatibility | For Apple iMac |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | 11 |
| Voltage | 1.35V/1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Specifications | 1024Meg x 64 Lead free Halogen free |
| Features | Increases Mac system performance Compatible with Mac systems All DDR3 and DDR3L modules are lead- and halogen-free Easy to install Every single module extensively tested at the component and module level Available in SODIMMs, RDIMMs, and ECC UDIMMs |
| وزن الشحنة | 0.06 kg |
| أبعاد الطرد | 173 × 123 × 13 mm |
The kit provides 16 GB as two 8 GB modules, matching the maximum supported by the compatible MacBook Pro (Mid 2012) and iMac models.
The modules run at DDR3 1600 (PC3 12800) with CAS latency 11, delivering the rated bandwidth the Mac memory controller expects.
Yes, the 204-pin DDR3 SO-DIMM form factor matches the memory slots in the listed MacBook Pro (Mid 2012) and compatible iMac systems.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟