BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Crucial
16 GB dual-channel DDR3 kit at 1600 MHz with CL11 latency for 2012 MacBook Pro
This 16 GB kit contains two 8 GB DDR3 SO-DIMM modules rated at 1600 MHz with CAS latency 11. It is built for the Apple MacBook Pro (Mid 2012) and runs at 1.35 V or 1.5 V without ECC or buffering. The unbuffered design suits standard notebook slots.
The DDR3 1600 (PC3 12800) standard tops out at 1600 MT/s and 1.35 V for DDR3L operation. Systems that only accept 1.5 V DDR3 will still run these modules at the higher voltage. Maximum density per slot is 8 GB in 204-pin form factor.
Installation requires opening the MacBook Pro bottom case, removing existing modules and seating the new SO-DIMMs until the retention clips click. Common issues are inserting modules at an angle or not pressing firmly enough to engage both clips. No heat spreader means tight clearances are not a problem.
| Brand | Crucial |
|---|---|
| Model | CT2K8G3S160BM |
| Type | 204-Pin DDR3 SO-DIMM |
| Compatibility | For Apple iMac |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | 11 |
| Voltage | 1.35V/1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Specifications | 1024Meg x 64 Lead free Halogen free |
| Features | Increases Mac system performance Compatible with Mac systems All DDR3 and DDR3L modules are lead- and halogen-free Easy to install Every single module extensively tested at the component and module level Available in SODIMMs, RDIMMs, and ECC UDIMMs |
| Lähetyspaino | 0.06 kg |
| Pakkauksen mitat | 173 × 123 × 13 mm |
The kit provides 16 GB as two 8 GB modules, matching the maximum supported by the compatible MacBook Pro (Mid 2012) and iMac models.
The modules run at DDR3 1600 (PC3 12800) with CAS latency 11, delivering the rated bandwidth the Mac memory controller expects.
Yes, the 204-pin DDR3 SO-DIMM form factor matches the memory slots in the listed MacBook Pro (Mid 2012) and compatible iMac systems.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?