NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Crucial
A 4GB DDR3 1866 ECC unbuffered DIMM with CL13 latency and 1.50V operation for server memory upgrades
This Crucial CT51272BA186DJ is a 4GB DDR3 1866 ECC unbuffered DIMM built for server platforms that require error-correcting memory. It operates at 1.50V with a CAS latency of CL13 and uses a 240-pin interface. The module is sold new as a single stick ranked 1Rx8.
Replacing older DDR3 1066 or 1333 modules with this 1866 speed part increases memory bandwidth where the platform supports it. The jump is worth it when the motherboard and CPU memory controller are qualified for PC3 14900 operation and the system can utilise ECC protection.
Confirm the motherboard has 240-pin DDR3 DIMM slots and a DDR3-enabled chipset before ordering. DDR3 modules will not fit DDR2 or DDR sockets. Ensure the platform accepts unbuffered ECC DIMMs rather than registered or fully buffered types.
| Brand | Crucial |
|---|---|
| Model | CT51272BA186DJ |
| Capacity | 4GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Sūtījuma svars | 0.07 kg |
| Sūtījuma izmēri | 155 × 122 × 13 mm |
The module uses the standard 240-pin DDR3 form factor and requires a motherboard with DDR3-enabled chipset and matching DIMM slots; it will not fit DDR2 or DDR sockets.
Align the notch on the gold edge connector with the key in the slot, press straight down until both side clips click, and verify the system reports 4 GB at 1866 MT/s with ECC active.
Replace it if memory diagnostics report correctable ECC errors that increase over time, if the server fails to POST with the kit installed, or when you upgrade to a platform that no longer supports DDR3.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?