NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Crucial
A 4GB DDR3 1866 ECC unbuffered DIMM with CL13 latency and 1.50V operation for server memory upgrades
This Crucial CT51272BA186DJ is a 4GB DDR3 1866 ECC unbuffered DIMM built for server platforms that require error-correcting memory. It operates at 1.50V with a CAS latency of CL13 and uses a 240-pin interface. The module is sold new as a single stick ranked 1Rx8.
Replacing older DDR3 1066 or 1333 modules with this 1866 speed part increases memory bandwidth where the platform supports it. The jump is worth it when the motherboard and CPU memory controller are qualified for PC3 14900 operation and the system can utilise ECC protection.
Confirm the motherboard has 240-pin DDR3 DIMM slots and a DDR3-enabled chipset before ordering. DDR3 modules will not fit DDR2 or DDR sockets. Ensure the platform accepts unbuffered ECC DIMMs rather than registered or fully buffered types.
| Brand | Crucial |
|---|---|
| Model | CT51272BA186DJ |
| Capacity | 4GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Sendingarþyngd | 0.07 kg |
| Stærð sendingar | 155 × 122 × 13 mm |
The module uses the standard 240-pin DDR3 form factor and requires a motherboard with DDR3-enabled chipset and matching DIMM slots; it will not fit DDR2 or DDR sockets.
Align the notch on the gold edge connector with the key in the slot, press straight down until both side clips click, and verify the system reports 4 GB at 1866 MT/s with ECC active.
Replace it if memory diagnostics report correctable ECC errors that increase over time, if the server fails to POST with the kit installed, or when you upgrade to a platform that no longer supports DDR3.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?